{"title":"Lift Kits","description":"\u003cp\u003e\u003cstrong\u003eLift Kits \u0026amp; Suspension Systems for Porsche Cayenne, VW Touareg \u0026amp; Audi Q7\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverlandtrek\u003c\/strong\u003e lift kits give your Cayenne, Touareg, or Q7 real ground clearance, larger tire fitment, and improved approach and departure angles — without compromising on-road manners. Our range covers everything from \u003cstrong\u003esimple 2-inch spacer kits\u003c\/strong\u003e to \u003cstrong\u003ecomplete 3-inch lift systems\u003c\/strong\u003e, plus all the geometry correction hardware needed to do it properly.\u003c\/p\u003e\n\u003ch3\u003eWhat We Offer\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-inch lift kits\u003c\/strong\u003e — Bolt-on spacer kits for air suspension and steel spring setups. The cleanest, easiest way to add ground clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-inch lift kits\u003c\/strong\u003e — Maximum-clearance lift for serious builds. Steeper approach\/departure angles and accommodation for significantly larger tires.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen 2 lift suspension systems\u003c\/strong\u003e — Mono-tube shocks with heavy-duty forks for 958 Cayenne and Gen 2 Touareg. Trail-tuned damping for real off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel spring lift kits\u003c\/strong\u003e — Purpose-built for coil-converted Cayenne and Touareg setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGeometry Correction Hardware\u003c\/h3\u003e\n\u003cp\u003eA lift kit alone changes suspension geometry. Any lift over 1.5\" benefits from supporting hardware — we offer everything needed for a properly corrected setup:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTubular upper control arms\u003c\/strong\u003e — Billet-machined replacements that restore correct camber and caster on lifted vehicles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubframe drop kits\u003c\/strong\u003e — Restore CV angles, steering geometry, and driveline operation on 2-3\" lifts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable sway bar end links\u003c\/strong\u003e — Eliminate sway bar binding caused by lift-induced angle changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable level sensor links\u003c\/strong\u003e — Recalibrate air suspension level sensors for any lift height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicles Covered\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePorsche Cayenne 955 (2002–2007)\u003c\/li\u003e\n\u003cli\u003ePorsche Cayenne 957 (2008–2010)\u003c\/li\u003e\n\u003cli\u003ePorsche Cayenne 958 (2011–2018)\u003c\/li\u003e\n\u003cli\u003eVolkswagen Touareg (all generations)\u003c\/li\u003e\n\u003cli\u003eAudi Q7\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're building a Cayenne, Touareg, or Q7 for serious off-road use, the right lift kit and geometry correction is the foundation of the entire build. Pair our lift systems with our \u003cstrong\u003eoff-road bumpers\u003c\/strong\u003e, \u003cstrong\u003eunderbody skid plates\u003c\/strong\u003e, and \u003cstrong\u003emodular roof racks\u003c\/strong\u003e for a complete trail-ready setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustom builds welcome.\u003c\/strong\u003e Contact us at info@overlandtrek.com for build consultations, fitment questions, or custom configurations. We build to order and ship worldwide.\u003c\/p\u003e","products":[{"product_id":"cayenne-958-touareg-gen-2-lift-kit-2011-2018","title":"Porsche Cayenne 958 \u0026 VW Touareg Gen 2 Lift Kit – Suspension System (2011–2018)","description":"\u003cp\u003e\u003cstrong\u003eCayenne 958 \u0026amp; Touareg Gen 2 Lift Kit – Suspension System (2011–2018)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/gen-2-lift-suspension-system-958touareg-11-18lift-suspension-systemoverlandtrekoverlandtrekot-c958-lk-gen241d144efe6ce03022bb7193da8e9a2dc-8848372.png?v=1778490632\" alt=\"Cayenne 958 \u0026amp; Touareg Gen 2 Lift Kit installed on 2011-2018 platform\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Overlandtrek Cayenne 958 \u0026amp; Touareg Gen 2 Lift Kit is purpose-built for serious off-road use on the 958 Cayenne and Gen 2 Touareg. Featuring mono-tube construction, oversized shock forks, and trail-tuned damping, this kit builds additional lift on top of the factory air suspension system — retaining all factory air suspension components and comfort.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7075 Aluminum Alloy construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — fits to factory points with no fault codes and no interference with sensors or vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty shock forks\u003c\/strong\u003e — double the thickness of OEM components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrail-tuned damping\u003c\/strong\u003e for improved off-road performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory air suspension fully retained\u003c\/strong\u003e — lift is added above the factory system, not replacing it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged 7075 aluminum lift spacers\u003c\/strong\u003e — high-strength, lightweight, precision machined\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 3 inches of lift\u003c\/strong\u003e — within legal limits for road use in most regions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-year warranty\u003c\/strong\u003e — free replacement parts provided for any defect within 12 months\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect bolt-on\u003c\/strong\u003e to factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpacer material:\u003c\/strong\u003e Forged 7075 aluminum alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift amount:\u003c\/strong\u003e Under 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir suspension:\u003c\/strong\u003e Factory system fully retained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year — free replacement parts if any issue within 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation — What You'll Need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Intermediate — DIY-friendly with mechanical experience\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 4–6 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools required:\u003c\/strong\u003e Floor jack, jack stands, basic socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling:\u003c\/strong\u003e None — direct bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAfter install:\u003c\/strong\u003e Full wheel alignment required — geometry correction recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicles:\u003c\/strong\u003e Porsche Cayenne 958 (Gen 2), Volkswagen Touareg Gen 2 (7P)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears:\u003c\/strong\u003e 2011–2018\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with Gen 1 platforms (955\/957\/Touareg Gen 1)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/gen-2-lift-suspension-system-958touareg-11-18lift-suspension-systemoverlandtrekoverlandtrekot-c958-lk-gen21-85a8fff4-20a1-4e52-9bff-bfcc9b8da7eb-4303556.png?v=1778490631\" alt=\"Cayenne 958 \u0026amp; Touareg Gen 2 Lift Kit mono-tube shock absorber detail\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAfter Installation\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA full wheel alignment is required after installation.\u003c\/strong\u003e This is a standard requirement for any suspension modification and ensures correct tyre wear and safe handling.\u003c\/p\u003e\n\n\u003ch3\u003eGeometry Correction Recommended\u003c\/h3\u003e\n\u003cp\u003ePair this Cayenne 958 \u0026amp; Touareg Gen 2 Lift Kit with our \u003ca href=\"\/products\/porsche-cayenne-955-957-958-v1-subframe-drop-kit-2-3-lift-geometry-correction\"\u003e\u003cstrong\u003eSubframe Drop Kit\u003c\/strong\u003e\u003c\/a\u003e, Upper Control Arms, and Sway Bar End Links for a complete corrected lifted build.\u003c\/p\u003e\n\n\u003cdiv style=\"display:grid;grid-template-columns:1fr 1fr;gap:1px;background:#e0e0e0;border:1px solid #e0e0e0;border-radius:8px;overflow:hidden;margin:24px 0;\"\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eFactory air suspension retained\u003c\/strong\u003e\u003cbr\u003eLift added above factory system — no air system removed\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003e1-year warranty\u003c\/strong\u003e\u003cbr\u003eFree replacement parts within 12 months of purchase\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eForged 7075 aluminum spacers\u003c\/strong\u003e\u003cbr\u003eHigh-strength, precision machined\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eWorldwide tracked shipping\u003c\/strong\u003e\u003cbr\u003eDelivery in 4-6 weeks, tracking provided\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDoes this remove or replace the factory air suspension?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eNo — the factory air suspension system is completely retained. The Cayenne 958 \u0026amp; Touareg Gen 2 Lift Kit spacers are installed above the factory strut top mounts, adding ride height while keeping all air suspension components, sensors, and compressors in place. Your air suspension continues to function normally.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs a wheel alignment required after installation?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes — a full wheel alignment is required after fitting any lift kit. This is standard practice for any suspension modification. Skipping alignment will cause uneven tyre wear and affect handling. Plan to take your vehicle to an alignment shop immediately after installation.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs this lift kit legal for road use?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThe Cayenne 958 \u0026amp; Touareg Gen 2 Lift Kit raises the vehicle under 3 inches, which is within the legal limit for road use in most countries and US states. However, vehicle modification laws vary by region. We recommend checking your local regulations before fitting any suspension modification.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat warranty does this come with?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eAll Overlandtrek lift kits include a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e. If any component has a defect or fails within 12 months of purchase, replacement parts will be provided free of charge. Contact info@overlandtrek.com with your order details.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWill this trigger fault codes?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eOn air suspension models, adding lift spacers may cause the ride height sensor to flag a fault. Fitting our Adjustable Level Sensor Links recalibrates the sensor position and prevents warning lights. Strongly recommended for air suspension vehicles.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDo I need geometry correction parts?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eGeometry correction is recommended for best handling and tyre wear. We offer \u003ca href=\"\/products\/porsche-cayenne-955-957-958-v1-subframe-drop-kit-2-3-lift-geometry-correction\"\u003e\u003cstrong\u003eSubframe Drop Kit\u003c\/strong\u003e\u003c\/a\u003e, Tubular Upper Control Arms, and Adjustable Sway Bar End Links — all available separately.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWill this fit the Cayenne 958 and Touareg Gen 2?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes — engineered specifically for the Porsche Cayenne 958 (2011–2018) and Volkswagen Touareg Gen 2 \/ 7P (2011–2018). Not compatible with Gen 1 platforms.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhere does this ship from and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we are happy to help plan your build.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003eCayenne 958 \u0026amp; Touareg Gen 2 Lift Kit Built for Durability\u003c\/h2\u003e\n\u003cp\u003eThe Cayenne 958 \u0026amp; Touareg Gen 2 Lift Kit is engineered with mono-tube shock construction and forged 7075 aluminum spacers that guarantee long-lasting durability and superior strength on lifted builds. Its rugged design not only adds real ride height but also provides excellent resistance against the stress of off-road use and larger tyres. Tailored specifically for the Porsche Cayenne 958 and Volkswagen Touareg Gen 2 \/ 7P, this Cayenne 958 \u0026amp; Touareg Gen 2 Lift Kit maintains structural integrity without compromising factory mounting points, making it an essential upgrade for serious overland builds.\u003c\/p\u003e\n\n\u003ch3\u003eEnhanced Off-Road Functionality of the Cayenne 958 \u0026amp; Touareg Gen 2 Lift Kit\u003c\/h3\u003e\n\u003cp\u003eDesigned for the demands of serious off-road use, the Cayenne 958 \u0026amp; Touareg Gen 2 Lift Kit features heavy-duty shock forks at double OEM thickness and trail-tuned damping for improved performance. This allows your vehicle to handle technical terrain and rough trails with confidence. Additionally, the Cayenne 958 \u0026amp; Touareg Gen 2 Lift Kit retains the factory air suspension system completely, giving you OEM ride comfort with serious added capability. Such features significantly improve vehicle capability in demanding environments.\u003c\/p\u003e\n\n\u003ch3\u003eEasy Installation and Vehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe Cayenne 958 \u0026amp; Touareg Gen 2 Lift Kit is crafted for a precise fit on the 2011–2018 Cayenne 958 and Touareg Gen 2 \/ 7P, ensuring seamless integration with factory mounting points. Installation of the Cayenne 958 \u0026amp; Touareg Gen 2 Lift Kit is direct bolt-on, requiring no cutting, drilling, or welding. This straightforward installation helps owners add lift efficiently, letting them get back to driving without delay. Compatibility across the VW Group Gen 2 platform and bolt-on simplicity are key benefits valued by owners.\u003c\/p\u003e\n","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":47605284929757,"sku":"OT-C958-LK-GEN2","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/gen-2-lift-suspension-system-958touareg-11-18lift-suspension-systemoverlandtrekoverlandtrekot-c958-lk-gen241d144efe6ce03022bb7193da8e9a2dc-8848372.png?v=1778490632"},{"product_id":"2-inch-lift-kit-cayenne-touareg-2002-2010","title":"Porsche Cayenne 955\/957 \u0026 VW Touareg 2-Inch Lift Kit (2002–2010)","description":"\u003cp\u003e\u003cstrong\u003e2-Inch Lift Kit for Porsche Cayenne 955\/957 \u0026amp; VW Touareg (2002–2010)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/Weixin_Image_20260513150422_247_32.jpg?v=1778656605\" alt=\"2-Inch Lift Kit installed on Porsche Cayenne and VW Touareg\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Overlandtrek 2-Inch Lift Kit adds real ground clearance to your 955\/957 Cayenne or Gen 1 Touareg by fitting precision-machined forged 7075 aluminum spacers above the factory strut top mounts — retaining the factory air suspension system completely. No fabrication, no permanent modifications, no air suspension removal.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7075 Aluminum Alloy construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — fits to factory points with no fault codes and no interference with sensors or vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 inches of additional ride height\u003c\/strong\u003e for larger tyres and improved off-road clearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged 7075 aluminum lift spacers\u003c\/strong\u003e — high-strength, precision machined, lightweight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory air suspension fully retained\u003c\/strong\u003e — spacers add lift above the factory system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront spacer installs over OEM struts\u003c\/strong\u003e — no strut removal required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear cradle drop\u003c\/strong\u003e maintains factory suspension geometry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 3 inches of lift\u003c\/strong\u003e — within road legal limits for most regions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-year warranty\u003c\/strong\u003e — free replacement parts for any defect within 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpacer material:\u003c\/strong\u003e Forged 7075 aluminum alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift amount:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir suspension:\u003c\/strong\u003e Factory system fully retained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year — free replacement parts within 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation — What You'll Need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Intermediate — DIY-friendly with mechanical experience\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 4–6 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools required:\u003c\/strong\u003e Floor jack, jack stands, basic socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling:\u003c\/strong\u003e None — direct bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAfter install:\u003c\/strong\u003e Full wheel alignment required — geometry correction recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicles:\u003c\/strong\u003e Porsche Cayenne 955 (2002–2007), Porsche Cayenne 957 (2008–2010), Volkswagen Touareg Gen 1 (2002–2010)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/two-inches-lift-suspension-system-cayennetouareg-02-10lift-suspension-systemoverlandtrekoverlandtrekot-uni-lk-2in5-2361865.png?v=1778490553\" alt=\"2-Inch Lift Kit forged aluminum spacer detail for Cayenne Touareg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAfter Installation\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA full wheel alignment is required after installation.\u003c\/strong\u003e Book an alignment appointment after fitting to ensure correct tyre wear and safe handling.\u003c\/p\u003e\n\n\u003ch3\u003eGeometry Correction Recommended\u003c\/h3\u003e\n\u003cp\u003eAny lift over 1.5 inches benefits from geometry correction. Pair this 2-Inch Lift Kit with our \u003ca href=\"\/products\/porsche-cayenne-955-957-958-v1-subframe-drop-kit-2-3-lift-geometry-correction\"\u003e\u003cstrong\u003eSubframe Drop Kit\u003c\/strong\u003e\u003c\/a\u003e, Upper Control Arms, Sway Bar End Links, and Level Sensor Links for a complete corrected build.\u003c\/p\u003e\n\n\u003cdiv style=\"display:grid;grid-template-columns:1fr 1fr;gap:1px;background:#e0e0e0;border:1px solid #e0e0e0;border-radius:8px;overflow:hidden;margin:24px 0;\"\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eFactory air suspension retained\u003c\/strong\u003e\u003cbr\u003eLift added above factory system — nothing removed\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003e1-year warranty\u003c\/strong\u003e\u003cbr\u003eFree replacement parts within 12 months of purchase\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eForged 7075 aluminum spacers\u003c\/strong\u003e\u003cbr\u003eHigh-strength, precision machined\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eWheel alignment required\u003c\/strong\u003e\u003cbr\u003eBook alignment after installation\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDoes this remove or replace the factory air suspension?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eNo — the factory air suspension is completely retained. The 2-Inch Lift Kit forged 7075 aluminum spacers are installed above the factory strut top mounts, adding ride height while leaving all air suspension components, sensors, and compressors fully in place and operational.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWill this trigger fault codes or warning lights?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eOn air suspension models, the ride height sensor may flag a warning after the lift is fitted. Our Adjustable Level Sensor Links recalibrate the sensor position to prevent fault codes. Strongly recommended for air suspension vehicles.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs a wheel alignment required after installation?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes — a full wheel alignment is required after any suspension modification. Book an alignment appointment immediately after fitting to ensure correct tyre wear, safe handling, and accurate steering.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs this lift kit legal for road use?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eAt 2 inches, the 2-Inch Lift Kit is within the legal lift limit for road use in most countries and US states. Vehicle modification laws vary by region — we recommend checking your local regulations before fitting any suspension lift.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat warranty does this come with?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003e\u003cstrong\u003e1-year warranty.\u003c\/strong\u003e If any component has a defect or issue within 12 months of purchase, replacement parts will be provided free of charge. Contact info@overlandtrek.com with your order number.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat tyre size can I run after a 2-inch lift?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eTypically up to approximately 275\/65R18 or similar depending on wheel offset. Contact info@overlandtrek.com with your wheel specs for a precise recommendation.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDo I need geometry correction parts?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eStrongly recommended — \u003ca href=\"\/products\/porsche-cayenne-955-957-958-v1-subframe-drop-kit-2-3-lift-geometry-correction\"\u003e\u003cstrong\u003eSubframe Drop Kit\u003c\/strong\u003e\u003c\/a\u003e, Tubular Upper Control Arms, Adjustable Sway Bar End Links, and Adjustable Level Sensor Links are all available separately.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhere does this ship from and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we are happy to help with fitment, tyre sizing, or build advice.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003e2-Inch Lift Kit Built for Durability\u003c\/h2\u003e\n\u003cp\u003eThe 2-Inch Lift Kit is engineered with forged 7075 aluminum spacers that guarantee long-lasting durability and superior strength on lifted builds. Its rugged design not only adds 2 inches of ride height but also provides excellent resistance against the stress of larger tyres and trail use. Tailored specifically for the Porsche Cayenne 955, 957, and VW Touareg Gen 1, this 2-Inch Lift Kit maintains structural integrity without compromising factory mounting points, making it an essential upgrade for owners running serious overland tyres.\u003c\/p\u003e\n\n\u003ch3\u003eEnhanced Off-Road Functionality of the 2-Inch Lift Kit\u003c\/h3\u003e\n\u003cp\u003eDesigned for the demands of overland and off-road use, the 2-Inch Lift Kit adds real ground clearance and opens the door to larger tyre sizes for serious trail capability. This allows your vehicle to clear obstacles and run aggressive tyres with confidence. Additionally, the 2-Inch Lift Kit retains the factory air suspension system completely, giving you OEM ride quality with added capability. Such features significantly improve vehicle capability in demanding environments.\u003c\/p\u003e\n\n\u003ch3\u003eEasy Installation and Vehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe 2-Inch Lift Kit is crafted for a precise fit on the Cayenne 955, 957, and Touareg Gen 1 platforms, ensuring seamless integration with factory strut top mounts. Installation of the 2-Inch Lift Kit is direct bolt-on, requiring no cutting, drilling, or welding. This straightforward installation helps owners add lift efficiently, letting them get back to driving without delay. Compatibility across the VW Group platform and bolt-on simplicity are key benefits valued by Cayenne and Touareg owners running this kit.\u003c\/p\u003e\n","brand":"Overlandtrek","offers":[{"title":"Red","offer_id":48013060800733,"sku":"OT-UNI-LK-2IN-1","price":799.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":48013060833501,"sku":"OT-UNI-LK-2IN-2","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/two-inches-lift-suspension-system-cayennetouareg-02-10lift-suspension-systemoverlandtrekoverlandtrekot-uni-lk-2in1-ad9f85d1-11b0-47ae-8d96-3a8cef126bd8-9011305.png?v=1778490553"},{"product_id":"3-inch-lift-kit-cayenne-touareg-2002-2010","title":"Porsche Cayenne 955\/957 \u0026 VW Touareg 3-Inch Lift Kit (2002–2010)","description":"\u003cp\u003e\u003cstrong\u003e3-Inch Lift Kit for Porsche Cayenne 955\/957 \u0026amp; VW Touareg (2002–2010)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/15.png?v=1773648323\" alt=\"3-Inch Lift Kit installed on Porsche Cayenne and VW Touareg\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Overlandtrek 3-Inch Lift Kit is the maximum-clearance lift for the Gen 1 Cayenne and Touareg platform. Precision-machined forged 7075 aluminum spacers are installed above the factory strut top mounts — retaining the factory air suspension system completely — to deliver the most aggressive stance and the largest possible tyre fitment for serious overland and off-road use.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7075 Aluminum Alloy construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — fits to factory points with no fault codes and no interference with sensors or vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 inches of additional ride height\u003c\/strong\u003e — maximum clearance for the platform\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged 7075 aluminum lift spacers\u003c\/strong\u003e — high-strength, precision machined, lightweight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory air suspension fully retained\u003c\/strong\u003e — lift added above factory system, nothing removed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 3 inches total lift\u003c\/strong\u003e — within road legal limits for most regions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-year warranty\u003c\/strong\u003e — free replacement parts for any defect within 12 months\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect bolt-on\u003c\/strong\u003e — no welding, drilling, or permanent modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpacer material:\u003c\/strong\u003e Forged 7075 aluminum alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift amount:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir suspension:\u003c\/strong\u003e Factory system fully retained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year — free replacement parts within 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation — What You'll Need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Intermediate — DIY-friendly with mechanical experience\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 4–6 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools required:\u003c\/strong\u003e Floor jack, jack stands, basic socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling:\u003c\/strong\u003e None — direct bolt-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAfter install:\u003c\/strong\u003e Full wheel alignment + geometry correction (see below)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicles:\u003c\/strong\u003e Porsche Cayenne 955 (2002–2007), Porsche Cayenne 957 (2008–2010), Volkswagen Touareg Gen 1 (2002–2010)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/1_ee83bfee-2307-48c3-91c9-531d320f2f6b.png?v=1773648482\" alt=\"3-Inch Lift Kit forged aluminum spring spacer detail for Cayenne Touareg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAfter Installation — Important\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA full wheel alignment is required after installation.\u003c\/strong\u003e At 3 inches of lift, geometry correction is also essential — see below. Do not drive the vehicle without completing both steps.\u003c\/p\u003e\n\n\u003ch3\u003eGeometry Correction — Required at 3 Inches\u003c\/h3\u003e\n\u003cp\u003eAt 3 inches of lift, CV angles, control arm geometry, and sway bar angles are significantly affected. The 3-Inch Lift Kit must be paired with our \u003ca href=\"\/products\/porsche-cayenne-955-957-958-v1-subframe-drop-kit-2-3-lift-geometry-correction\"\u003e\u003cstrong\u003eSubframe Drop Kit\u003c\/strong\u003e\u003c\/a\u003e, Tubular Upper Control Arms, Adjustable Sway Bar End Links, and Adjustable Level Sensor Links.\u003c\/p\u003e\n\n\u003cdiv style=\"display:grid;grid-template-columns:1fr 1fr;gap:1px;background:#e0e0e0;border:1px solid #e0e0e0;border-radius:8px;overflow:hidden;margin:24px 0;\"\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eFactory air suspension retained\u003c\/strong\u003e\u003cbr\u003eLift added above factory system — nothing removed\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003e1-year warranty\u003c\/strong\u003e\u003cbr\u003eFree replacement parts within 12 months of purchase\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eForged 7075 aluminum spacers\u003c\/strong\u003e\u003cbr\u003eHigh-strength, precision machined\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eWheel alignment required\u003c\/strong\u003e\u003cbr\u003eGeometry correction also required — see FAQ\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDoes this remove or replace the factory air suspension?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eNo — the factory air suspension is completely retained. The 3-Inch Lift Kit forged 7075 aluminum spacers install above the factory strut top mounts, adding ride height while leaving all air suspension components, sensors, and compressors fully in place and operational.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs geometry correction really required at 3 inches?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes — required, not optional. At 3 inches, CV angles, control arm geometry, and sway bar angles are significantly affected. Running the 3-Inch Lift Kit without geometry correction will cause accelerated tyre wear, poor handling, and potential CV joint failure. You must pair this kit with our \u003ca href=\"\/products\/porsche-cayenne-955-957-958-v1-subframe-drop-kit-2-3-lift-geometry-correction\"\u003e\u003cstrong\u003eSubframe Drop Kit\u003c\/strong\u003e\u003c\/a\u003e, Tubular Upper Control Arms, Adjustable Sway Bar End Links, and Adjustable Level Sensor Links.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs a wheel alignment required after installation?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes — a full wheel alignment is required. Book an alignment appointment immediately after fitting and geometry correction installation. Do not drive long distances without alignment.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs this lift kit legal for road use?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThe 3-Inch Lift Kit lifts the vehicle under 3 inches, which is within the road legal limit in most countries and US states. Vehicle modification laws vary by region — check your local regulations before fitting a suspension lift.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat warranty does this come with?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003e\u003cstrong\u003e1-year warranty.\u003c\/strong\u003e Free replacement parts for any defect or failure within 12 months of purchase. Contact info@overlandtrek.com with your order number.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat geometry correction parts do I need?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003e\u003ca href=\"\/products\/porsche-cayenne-955-957-958-v1-subframe-drop-kit-2-3-lift-geometry-correction\"\u003e\u003cstrong\u003eSubframe Drop Kit\u003c\/strong\u003e\u003c\/a\u003e, Tubular Upper Control Arms, Adjustable Sway Bar End Links, and Adjustable Level Sensor Links (for air suspension vehicles). Email info@overlandtrek.com and we will build a complete parts list for your vehicle.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat is the largest tyre I can run?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eApproximately 285\/70R18 or similar with proper wheel offset. Contact info@overlandtrek.com with your wheel specs for a precise recommendation.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhere does this ship from and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we will help you build the right setup for your vehicle.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003e3-Inch Lift Kit Built for Durability\u003c\/h2\u003e\n\u003cp\u003eThe 3-Inch Lift Kit is engineered with forged 7075 aluminum spacers that guarantee long-lasting durability and superior strength on lifted builds. Its rugged design not only delivers maximum clearance for the platform but also provides excellent resistance against the stress of lifted ride heights. Tailored specifically for the Porsche Cayenne 955, 957, and VW Touareg Gen 1, this 3-Inch Lift Kit maintains structural integrity without compromising factory mounting points, making it an essential upgrade for serious overland builds running large tyres.\u003c\/p\u003e\n\n\u003ch3\u003eEnhanced Off-Road Functionality of the 3-Inch Lift Kit\u003c\/h3\u003e\n\u003cp\u003eDesigned for the demands of serious off-road use, the 3-Inch Lift Kit delivers the most aggressive stance and largest possible tyre fitment on the Gen 1 Cayenne and Touareg platform. This allows your vehicle to clear obstacles and run aggressive trail tyres with confidence. Additionally, the 3-Inch Lift Kit retains the factory air suspension system completely, giving you the comfort of OEM ride quality with the capability of a maximum lift. Such features significantly improve vehicle capability in demanding environments.\u003c\/p\u003e\n\n\u003ch3\u003eEasy Installation and Vehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe 3-Inch Lift Kit is crafted for a precise fit on the Cayenne 955, 957, and Touareg Gen 1 platforms, ensuring seamless integration with factory strut top mounts. Installation of the 3-Inch Lift Kit is direct bolt-on, requiring no cutting, drilling, or welding. This straightforward installation helps owners reach maximum lift efficiently, letting them get back to driving without delay. Compatibility across the VW Group platform and bolt-on simplicity are key benefits valued by Cayenne and Touareg owners running this kit.\u003c\/p\u003e\n","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":47610013712605,"sku":"OT-UNI-LK-3IN","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/porsche-cayenne-955957-vw-touareg-3-inch-lift-kit-2002-2010lift-suspension-systemoverlandtrekoverlandtrekot-uni-lk-3in15-3720289.png?v=1781235436"},{"product_id":"2-inch-steel-spring-lift-kit-cayenne-touareg-2002-2010","title":"Porsche Cayenne 955\/957 \u0026 VW Touareg 2-Inch Steel Spring Lift Kit (2002–2010)","description":"\u003cp\u003e\u003cstrong\u003e2-Inch Steel Spring Lift Kit for Porsche Cayenne 955\/957 \u0026amp; VW Touareg (2002–2010)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/two-inches-steel-spring-cayennetouareg-02-10lift-suspension-systemoverlandtrekoverlandtrekot-uni-lk-ss2in20260324093152-300-5-7184577.jpg?v=1778490629\" alt=\"2-Inch Steel Spring Lift Kit installed on Porsche Cayenne and VW Touareg\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Overlandtrek 2-Inch Steel Spring Lift Kit is the definitive air-suspension-delete option for the Gen 1 Cayenne and Touareg platform. The lift spacers are installed at the top mount of the factory suspension — the original suspension system itself does not need to be removed — and uprated steel coil springs replace the factory air bags for a simpler, more reliable long-term setup. Built for overlanders who want a dependable system in remote locations far from specialist workshops.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7075 Aluminum Alloy construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — fits to factory points with no fault codes and no interference with sensors or vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2 inches of additional ride height\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged 7075 aluminum lift spacers\u003c\/strong\u003e — installed at factory strut top mount, original suspension retained below\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUprated steel coil springs\u003c\/strong\u003e replace factory air bags only — original dampers and struts retained\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEliminates air suspension bags, compressor, and sensor complexity\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTuned for load-carrying overland use\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 3 inches of lift\u003c\/strong\u003e — within road legal limits for most regions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-year warranty\u003c\/strong\u003e — free replacement parts for any defect within 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpacer material:\u003c\/strong\u003e Forged 7075 aluminum alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring material:\u003c\/strong\u003e High-tensile steel coil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift amount:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year — free replacement parts within 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation — What You'll Need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced — requires spring compressor and air suspension delete knowledge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 6–8 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools required:\u003c\/strong\u003e Floor jack, jack stands, spring compressor, full socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso required:\u003c\/strong\u003e Air suspension emulator \/ delete module (to clear fault codes — sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAfter install:\u003c\/strong\u003e Full wheel alignment required — geometry correction recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicles:\u003c\/strong\u003e Porsche Cayenne 955 (2002–2007), Porsche Cayenne 957 (2008–2010), Volkswagen Touareg Gen 1 (2002–2010)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/two-inches-steel-spring-cayennetouareg-02-10lift-suspension-systemoverlandtrekoverlandtrekot-uni-lk-ss2in2-4b9c2a4b-ad68-4be0-a5a1-fd9b2a2a8385-8392171.png?v=1778490560\" alt=\"2-Inch Steel Spring Lift Kit full component layout for air delete conversion\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAfter Installation — Important\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA full wheel alignment is required after installation.\u003c\/strong\u003e Deleting the air suspension system will also trigger fault codes and warning lights — an air suspension emulator or delete module will be needed to clear these. This is a committed modification.\u003c\/p\u003e\n\n\u003ch3\u003eGeometry Correction Recommended\u003c\/h3\u003e\n\u003cp\u003ePair with our \u003ca href=\"\/products\/porsche-cayenne-955-957-958-v1-subframe-drop-kit-2-3-lift-geometry-correction\"\u003e\u003cstrong\u003eSubframe Drop Kit\u003c\/strong\u003e\u003c\/a\u003e, Upper Control Arms, and Sway Bar End Links for a complete corrected build.\u003c\/p\u003e\n\n\u003cdiv style=\"display:grid;grid-template-columns:1fr 1fr;gap:1px;background:#e0e0e0;border:1px solid #e0e0e0;border-radius:8px;overflow:hidden;margin:24px 0;\"\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eOriginal suspension retained\u003c\/strong\u003e\u003cbr\u003eSpacers at top mount — original struts stay in place\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003e1-year warranty\u003c\/strong\u003e\u003cbr\u003eFree replacement parts within 12 months of purchase\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eForged 7075 aluminum spacers\u003c\/strong\u003e\u003cbr\u003eHigh-strength, precision machined\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eWheel alignment required\u003c\/strong\u003e\u003cbr\u003eBook alignment after installation\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDoes this kit remove the original suspension system?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eNo — the original struts and dampers are retained. The 2-Inch Steel Spring Lift Kit spacers mount at the factory strut top mount above the existing suspension. Only the factory air bags are replaced with steel coil springs. The suspension geometry below the top mount is unchanged.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat is the difference between this and the standard 2-inch lift kit?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThe \u003ca href=\"\/products\/two-inches-lift-suspension-system-cayenne-touareg-02-10\"\u003e\u003cstrong\u003estandard 2-inch kit\u003c\/strong\u003e\u003c\/a\u003e adds lift spacers over the factory air suspension, retaining the full air system. This 2-Inch Steel Spring Lift Kit replaces the factory air bags with steel coils and deletes the air suspension — for owners who want to eliminate the complexity of the air system entirely for long-term reliability.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWill deleting the air suspension cause fault codes?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes — removing the air suspension triggers warning lights and fault codes from the suspension control module. An air suspension emulator or delete module is required to clear these. This is a committed modification. Contact info@overlandtrek.com before ordering if you have questions about the conversion process.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs a wheel alignment required after installation?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes — a full wheel alignment is required after any suspension modification. Book an alignment appointment immediately after fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs this lift kit legal for road use?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eAt 2 inches, the 2-Inch Steel Spring Lift Kit is within the road legal lift limit for most countries and US states. However, deletion of the factory air suspension system may affect your vehicle's compliance with local roadworthiness standards. Check with your local authority if you are unsure.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat warranty does this come with?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003e\u003cstrong\u003e1-year warranty.\u003c\/strong\u003e Free replacement parts for any defect or failure within 12 months. Contact info@overlandtrek.com with your order number.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhere does this ship from and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we are happy to walk you through the full conversion process.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003e2-Inch Steel Spring Lift Kit Built for Durability\u003c\/h2\u003e\n\u003cp\u003eThe 2-Inch Steel Spring Lift Kit is engineered with forged 7075 aluminum spacers and high-tensile steel coil springs that guarantee long-lasting durability and superior load-carrying capability. Its rugged design not only adds 2 inches of ride height but also provides excellent resistance against the stress of overland loads and rough terrain. Tailored specifically for the Porsche Cayenne 955, 957, and VW Touareg Gen 1, this 2-Inch Steel Spring Lift Kit maintains structural integrity without compromising the original suspension below the top mount, making it an essential upgrade for serious long-distance overland builds.\u003c\/p\u003e\n\n\u003ch3\u003eEnhanced Off-Road Functionality of the 2-Inch Steel Spring Lift Kit\u003c\/h3\u003e\n\u003cp\u003eDesigned for the demands of remote overland travel, the 2-Inch Steel Spring Lift Kit eliminates factory air suspension complexity by replacing the air bags with proven steel coil springs. This allows your vehicle to operate dependably far from specialist workshops. Additionally, the 2-Inch Steel Spring Lift Kit adds clearance for larger tyres while keeping the original struts in place, giving you flexibility and confidence on long trips. Such features significantly improve vehicle reliability in demanding environments.\u003c\/p\u003e\n\n\u003ch3\u003eEasy Installation and Vehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe 2-Inch Steel Spring Lift Kit is crafted for a precise fit on the Cayenne 955, 957, and Touareg Gen 1 platforms, ensuring seamless integration with factory strut top mounts. Installation of the 2-Inch Steel Spring Lift Kit is direct bolt-on, requiring no cutting, drilling, or welding. This straightforward installation helps owners commit to the air delete conversion efficiently, letting them get back to driving without delay. Compatibility across the VW Group platform and bolt-on simplicity are key benefits valued by Cayenne and Touareg owners.\u003c\/p\u003e\n","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":47611063271645,"sku":"OT-UNI-LK-SS2IN","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/two-inches-steel-spring-cayennetouareg-02-10lift-suspension-systemoverlandtrekoverlandtrekot-uni-lk-ss2in20260324093152-300-5-7184577.jpg?v=1778490629"},{"product_id":"porsche-cayenne-vw-touareg-tubular-upper-control-arms","title":"Porsche Cayenne \u0026 VW Touareg Tubular Upper Control Arms – Lift Geometry Correction","description":"\u003cp\u003e\u003cstrong\u003ePorsche Cayenne \u0026amp; VW Touareg Tubular Upper Control Arms – Lift Geometry Correction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/41d144efe6ce03022bb7193da8e9a2dc_3b076dae-4e7e-48af-98f0-ac9656f5661a.png?v=1775712360\" alt=\"Tubular Upper Control Arms for lifted Porsche Cayenne and VW Touareg\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Overlandtrek Tubular Upper Control Arms are an essential geometry correction component for any lifted Cayenne, Touareg, or Audi Q7 build. When you lift the platform 2 inches or more, the factory upper control arms run at angles that accelerate wear and cause handling issues. These Tubular Upper Control Arms restore correct geometry, protect your CV joints and tyres, and allow proper wheel alignment to be achieved.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7075 Aluminum Alloy construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — fits to factory points with no fault codes and no interference with sensors or vehicle electronics\u003c\/li\u003e\n\u003cli\u003eCorrects upper arm geometry on 2–3 inch lifted vehicles\u003c\/li\u003e\n\u003cli\u003eHeavy-duty tubular construction — significantly stronger than factory stamped arms\u003c\/li\u003e\n\u003cli\u003eExtended length to restore correct ball joint angles at lifted ride height\u003c\/li\u003e\n\u003cli\u003eAllows full wheel alignment to be performed correctly after lift installation\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on replacement for factory upper control arms\u003c\/li\u003e\n\u003cli\u003e1-year warranty — free replacement parts within 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 7075 aluminum alloy\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year — free replacement parts within 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicles: Porsche Cayenne 955 (2002–2007), Cayenne 957 (2008–2010), Volkswagen Touareg Gen 1 (2002–2010), Touareg Gen 2 (2010–2018), Audi Q7 (2006–2015)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/1_48a9fd9e-c3b0-4b25-8c44-e7bc5ad60c1e.png?v=1775712360\" alt=\"Tubular Upper Control Arms installed front suspension detail Cayenne Touareg\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAfter Installation\u003c\/h3\u003e\n\u003cp\u003eA full wheel alignment is required after Tubular Upper Control Arms installation. This is not optional — the purpose of fitting these arms on a lifted vehicle is to restore correct geometry so that alignment can be properly set. Always complete a four-wheel alignment after fitting.\u003c\/p\u003e\n\n\u003cp\u003e✅ Required geometry correction Essential for safe operation on any 2-3 inch lift\u003c\/p\u003e\n\u003cp\u003e✅ 1-year warranty Free replacement parts within 12 months\u003c\/p\u003e\n\u003cp\u003e✅ Wheel alignment required after fitting Restores correct geometry for proper alignment\u003c\/p\u003e\n\u003cp\u003e✅ Worldwide tracked shipping Delivery in 4-6 weeks, tracking provided\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I really need these on a lifted Cayenne?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes — on a 2-inch or larger lift, the factory upper control arms are too short for the new ride height. Ball joints operate at incorrect angles, causing rapid wear, poor handling, and uneven tyre wear. Tubular Upper Control Arms are not optional on any properly executed lifted build.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs a wheel alignment required after fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes — a full four-wheel alignment is mandatory after installation. The arms restore correct geometry specifically so that accurate alignment can be set. Do not skip the alignment step.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat lift height do these work with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for vehicles with 2–3 inches of lift. Not required at stock height and not designed for lifts beyond 3 inches.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo these allow camber and caster adjustment?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eContact us at info@overlandtrek.com to confirm the specific adjustment range for your vehicle and lift height combination.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I install these myself?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement requires a vehicle lift, suspension tools, and mechanical competence. Professional installation recommended. A four-wheel alignment must be performed immediately after installation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat warranty does this come with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1-year warranty. Free replacement parts for any defect within 12 months. Contact info@overlandtrek.com with your order number.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhere does this ship from and how long does delivery take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmail us at info@overlandtrek.com — we are happy to help with fitment and build planning.\u003c\/p\u003e\n\n\u003ch2\u003eTubular Upper Control Arms Built for Durability\u003c\/h2\u003e\n\u003cp\u003eThe Tubular Upper Control Arms are engineered with aircraft-grade 7075 aluminum alloy that guarantees long-lasting durability and superior strength on lifted builds. Their rugged design not only restores correct suspension geometry but also provides excellent resistance against the stress caused by lifted ride heights. Tailored specifically for the Cayenne 955, 957, Touareg Gen 1 and Gen 2, and Audi Q7, these Tubular Upper Control Arms maintain structural integrity without compromising factory mounting points, making them an essential upgrade for owners running a 2–3 inch lift.\u003c\/p\u003e\n\n\u003ch3\u003eEnhanced Off-Road Functionality of the Tubular Upper Control Arms\u003c\/h3\u003e\n\u003cp\u003eDesigned for the demands of lifted off-road builds, the Tubular Upper Control Arms correct upper arm angles and ball joint geometry to restore proper suspension function. This allows your vehicle to handle tough trails and daily driving without accelerated wear or poor handling. Additionally, the Tubular Upper Control Arms reduce long-term stress on CV joints and tyres, giving you the confidence to run a lifted build long-term. Such features significantly improve vehicle reliability and safety in demanding environments.\u003c\/p\u003e\n\n\u003ch3\u003eEasy Installation and Vehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe Tubular Upper Control Arms are crafted for a precise fit on the Cayenne 955, 957, Touareg Gen 1 and Gen 2, and Audi Q7, ensuring seamless integration with factory mounting points. Installation of the Tubular Upper Control Arms is direct bolt-on, requiring no welding or fabrication. This straightforward installation helps owners correct lift geometry efficiently, letting them get back to driving without delay. Compatibility across the VW Group platform and bolt-on simplicity are key benefits valued by owners running these Tubular Upper Control Arms.\u003c\/p\u003e\n","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":47760411918557,"sku":"OT-UNI-LK-UCA","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/porsche-cayenne-vw-touareg-tubular-upper-control-arms-lift-geometry-correctionlift-suspension-systemoverlandtrekoverlandtrekot-uni-lk-uca41d144efe6ce03022bb7193-6814374.png?v=1781235433"},{"product_id":"adjustable-front-sway-bar-end-links-cayenne-touareg-audi-q7","title":"Porsche Cayenne \u0026 VW Touareg \u0026 Audi Q7 Adjustable Front Sway Bar End Links – Lift Kit","description":"\u003cp\u003e\u003cstrong\u003eAdjustable Front Sway Bar End Links for Lifted Porsche Cayenne, VW Touareg \u0026amp; Audi Q7\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Overlandtrek Adjustable Front Sway Bar End Links correct sway bar geometry on lifted Cayenne, Touareg, and Q7 builds. When you lift the vehicle, the factory end links become too short — putting the sway bar under constant preload, causing clunking, stiff handling, and premature joint wear. These adjustable links restore correct sway bar geometry and eliminate those issues.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7075 Aluminum Alloy construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — fits to factory points with no fault codes and no interference with sensors or vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable length\u003c\/strong\u003e — set to correct sway bar geometry for your specific lift height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty construction\u003c\/strong\u003e — significantly stronger than factory links\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect bolt-on replacement\u003c\/strong\u003e for factory end links\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEliminates sway bar bind, clunking, and premature wear\u003c\/strong\u003e on lifted builds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-year warranty\u003c\/strong\u003e — free replacement parts within 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment range:\u003c\/strong\u003e Suitable for 2–3 inch lifted vehicles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year — free replacement parts within 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicles:\u003c\/strong\u003e Porsche Cayenne 955 (2002–2007), Cayenne 957 (2008–2010), Volkswagen Touareg Gen 1 (2002–2010), Audi Q7 (2006–2015)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdjustable Front Sway Bar End Links Built for Heavy-Duty Use\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eThe adjustable front sway bar end links are engineered with 7075 aluminum alloy that guarantees long-lasting durability and reliable performance on lifted builds. Their purpose-built design not only restores correct sway bar geometry but also provides excellent resistance against the stress caused by lifted suspension travel. Tailored specifically for the Porsche Cayenne, VW Touareg, and Audi Q7, these end links maintain structural integrity without compromising factory mounting points, making them an essential upgrade for owners running a 2-inch or larger lift.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEnhanced Suspension Performance With Adjustable Front Sway Bar End Links\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eDesigned for the demands of lifted off-road builds, the adjustable front sway bar end links correct sway bar angles and eliminate the bind caused by undersized factory links. This allows your vehicle to handle bumps, trails, and daily driving without clunking or stiff handling. Additionally, the links reduce long-term wear on ball joints and bushings, giving you the confidence to push your build harder on any adventure. Such features significantly improve vehicle reliability and ride quality in demanding environments.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Vehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe adjustable front sway bar end links are crafted for a precise fit on the Cayenne 955, 957, Touareg Gen 1, and Audi Q7, ensuring seamless integration with factory sway bar mounting points. Installation is direct bolt-on, requiring only basic hand tools and a lift or ramps. This straightforward installation helps owners correct lift geometry efficiently, letting them get back to driving without delay. Compatibility across the VW Group platform and adjustable length are key benefits valued by owners.\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 1px; background: #e0e0e0; border: 1px solid #e0e0e0; border-radius: 8px; overflow: hidden; margin: 24px 0;\"\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eRecommended for any 2+ inch lift\u003c\/strong\u003e\u003cbr\u003eEliminates sway bar bind and clunking\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003e1-year warranty\u003c\/strong\u003e\u003cbr\u003eFree replacement parts within 12 months\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eAdjustable length\u003c\/strong\u003e\u003cbr\u003eDial in correct geometry for your lift height\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eWorldwide tracked shipping\u003c\/strong\u003e\u003cbr\u003eDelivery in 4-6 weeks, tracking provided\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat happens if I don't replace the sway bar links after lifting?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eFactory end links are too short for the new suspension travel on a lifted vehicle — they put the sway bar under constant preload, causing clunking over bumps, stiff handling, and rapid wear of the end link ball joints. Replacing the end links is strongly recommended on any 2-inch or larger lift.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow do I set the correct length?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eInstructions are included. With the vehicle at ride height on a flat surface, adjust each link so the sway bar sits at the correct angle — typically close to horizontal. A suspension alignment shop can also verify and set this during your alignment appointment.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat warranty does this come with?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003e1-year warranty.\u003c\/strong\u003e Free replacement parts for any defect within 12 months. Contact info@overlandtrek.com with your order number.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this fit my Cayenne 955 or 957?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — fits Porsche Cayenne 955 (2002–2007), 957 (2008–2010), VW Touareg Gen 1 (2002–2010), and Audi Q7 (2006–2015).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I install these myself?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — relatively straightforward with basic hand tools and a lift or ramps. Instructions included. An alignment appointment is recommended after any geometry correction work.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhere does this ship from and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we are happy to help.\u003c\/p\u003e\n\u003c\/details\u003e\n","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":47760483188957,"sku":"OT-UNI-LK-SBL","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/porsche-cayenne-vw-touareg-audi-q7-adjustable-front-sway-bar-end-links-lift-kitlift-suspension-systemoverlandtrekoverlandtrekot-uni-lk-sbl1-f2dadcf6-56c1-4d05-8-9833787.png?v=1781235428"},{"product_id":"adjustable-level-sensor-links-cayenne-touareg-audi-q7-air-suspension","title":"Porsche Cayenne \u0026 VW Touareg \u0026 Audi Q7 Adjustable Level Sensor Links – Lift Kit","description":"\u003cp\u003e\u003cstrong\u003eAdjustable Level Sensor Links for Lifted Air Suspension — Porsche Cayenne, VW Touareg \u0026amp; Audi Q7\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Overlandtrek Adjustable Level Sensor Links prevent air suspension fault codes and warning lights after a lift kit installation. When you lift the vehicle, factory level sensor links read the new ride height as an error — these adjustable links recalibrate the sensor position so the system reads correctly at the lifted height.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7075 Aluminum Alloy construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — fits to factory points with no fault codes and no interference with sensors or vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrevents air suspension fault codes\u003c\/strong\u003e after lift kit installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable length\u003c\/strong\u003e — recalibrates sensor position for 2–3 inch lifts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect bolt-on replacement\u003c\/strong\u003e for factory sensor links\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompatible with Porsche, VW, and Audi air suspension systems\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicles:\u003c\/strong\u003e Porsche Cayenne 955 (2002–2007) with air suspension, Cayenne 957 (2008–2010) with air suspension, Volkswagen Touareg Gen 1 with air suspension, Audi Q7 with air suspension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdjustable Level Sensor Links Built for Durability and Reliable Use\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eThe adjustable level sensor links are engineered with precision-machined 7075 aluminum alloy that guarantees long-lasting durability and reliable performance on lifted air suspension builds. Their purpose-built design not only recalibrates sensor position but also provides excellent resistance against the vibration and stress caused by off-road use. Tailored specifically for the Porsche Cayenne, VW Touareg, and Audi Q7, these links maintain structural integrity without compromising factory sensor mounting, making them an essential upgrade for owners running a lift kit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEnhanced Air Suspension Functionality With Adjustable Level Sensor Links\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eDesigned for the demands of lifted air suspension vehicles, the adjustable level sensor links correct sensor readings to match the new ride height after a lift kit installation. This allows your vehicle to operate without fault codes, warning lights, or limited air suspension function. Additionally, the links restore proper communication between the sensor and the suspension control module, giving you confidence in daily driving and off-road use. Such features significantly improve vehicle reliability and safety in demanding environments.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Vehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe adjustable level sensor links are crafted for a precise fit on the Cayenne 955, 957, Touareg Gen 1, and Audi Q7 with factory air suspension, ensuring seamless integration with original sensor mounting points. Installation is direct bolt-on, requiring no specialized tools. This straightforward installation helps owners eliminate lift-related fault codes quickly, letting them get back to driving without delay. Compatibility across the VW Group air suspension platform and simplicity of fitment are key benefits valued by owners.\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 1px; background: #e0e0e0; border: 1px solid #e0e0e0; border-radius: 8px; overflow: hidden; margin: 24px 0;\"\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eEssential for air suspension vehicles\u003c\/strong\u003e\u003cbr\u003ePrevents fault codes after lift installation\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eWorldwide tracked shipping\u003c\/strong\u003e\u003cbr\u003eDelivery in 4-6 weeks, tracking provided\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eBuilt to order\u003c\/strong\u003e\u003cbr\u003eManufactured to spec at our facility\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eExpert support\u003c\/strong\u003e\u003cbr\u003eEmail info@overlandtrek.com anytime\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill I definitely get warning lights without these after a lift?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eOn air suspension-equipped models, yes — in most cases the suspension control module will detect the change in sensor position and flag a fault, potentially limiting air suspension operation. These links recalibrate the sensor position and prevent this.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDo I need these if I have steel spring suspension?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo — specifically for air suspension-equipped vehicles only.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow do I set the correct adjustment length?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eInstructions included. Adjust so the sensor reads the correct ride height at the lifted position. A suspension shop can also set these during installation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this fit my Cayenne 955 or 957?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — designed for Porsche Cayenne 955 (2002–2007), 957 (2008–2010), VW Touareg Gen 1, and Audi Q7, all with factory air suspension.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhere does this ship from, and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we're happy to help.\u003c\/p\u003e\n\u003c\/details\u003e\n","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":47760933421277,"sku":"OT-UNI-LK-LSL","price":98.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/porsche-cayenne-vw-touareg-audi-q7-adjustable-level-sensor-links-lift-kitlift-suspension-systemoverlandtrekoverlandtrekot-uni-lk-lslc1b00fa11411ccdad2eb8fe89a6d-8821915.png?v=1781235432"},{"product_id":"subframe-drop-kit-porsche-cayenne-touareg-audi-q7-2-3-inch-lift","title":"Porsche Cayenne \u0026 VW Touareg \u0026 Audi Q7 Subframe Drop Kit – 2–3 Inch Lift","description":"\u003cp\u003e\u003cstrong\u003eSubframe Drop Kit for Porsche Cayenne, VW Touareg \u0026amp; Audi Q7 — 2–3 Inch Lift Geometry Correction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Overlandtrek Subframe Drop Kit corrects CV joint angles, driveshaft geometry, and subframe position on lifted Cayenne, Touareg, and Q7 builds. When you lift the vehicle, the front subframe remains at its original height — causing CV joint stress, driveshaft vibration, and premature drivetrain wear. This kit repositions the subframe to restore correct relative geometry.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7075 Aluminum Alloy construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — fits to factory points with no fault codes and no interference with sensors or vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrects CV joint angles\u003c\/strong\u003e on 2–3 inch lifted vehicles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrects front driveshaft geometry\u003c\/strong\u003e — eliminates vibration caused by incorrect angles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces drivetrain stress and wear\u003c\/strong\u003e common on lifted builds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision machined hardware\u003c\/strong\u003e for exact fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect bolt-on\u003c\/strong\u003e — no welding or fabrication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-year warranty\u003c\/strong\u003e — free replacement parts within 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 7075 aluminum alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year — free replacement parts within 12 months\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible lift range:\u003c\/strong\u003e 2–3 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicles:\u003c\/strong\u003e Porsche Cayenne 955 (2002–2007), Cayenne 957 (2008–2010), Cayenne 958 (2011–2018), Volkswagen Touareg Gen 1 and Gen 2, Audi Q7\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSubframe Drop Kit Built for Durability and Rugged Use\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eThe subframe drop kit is engineered with precision-machined 7075 aluminum alloy that guarantees long-lasting durability and reliable performance on lifted builds. Its purpose-built design not only restores correct drivetrain geometry but also provides excellent resistance against the stress caused by lifted suspension angles. Tailored specifically for the Porsche Cayenne, VW Touareg, and Audi Q7, this kit maintains structural integrity without compromising factory mounting points, making it an essential upgrade for owners running a 2–3 inch lift.\u003c\/p\u003e\n\u003ch3\u003eEnhanced Off-Road Functionality With a Subframe Drop Kit\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eDesigned for the demands of lifted off-road builds, the subframe drop kit corrects CV joint angles, driveshaft geometry, and subframe position to restore proper drivetrain function. This allows your vehicle to handle tough trails and daily driving without vibration or premature wear. Additionally, the kit reduces long-term stress on CV joints and driveshafts, giving you the confidence to push your build harder on any adventure. Such features significantly improve vehicle reliability and safety in demanding environments.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Vehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe subframe drop kit is crafted for a precise fit on the Cayenne 955, 957, 958, Touareg Gen 1 and Gen 2, and Audi Q7, ensuring seamless integration with factory subframe mounting points. Installation is direct bolt-on, requiring no welding or fabrication. This straightforward installation helps owners correct lift geometry efficiently, letting them get back to driving without delay. Compatibility across the VW Group platform and simplicity of fitment are key benefits valued by owners.\u003c\/p\u003e\n\u003ch3\u003eAfter Installation\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA full wheel alignment is required after subframe drop installation.\u003c\/strong\u003e Professional installation strongly recommended — the job requires supporting and lowering the front subframe safely.\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 1px; background: #e0e0e0; border: 1px solid #e0e0e0; border-radius: 8px; overflow: hidden; margin: 24px 0;\"\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eEssential for 2-3 inch lifts\u003c\/strong\u003e\u003cbr\u003eCorrects CV joint angles and driveshaft geometry\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003e1-year warranty\u003c\/strong\u003e\u003cbr\u003eFree replacement parts within 12 months\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eWheel alignment required\u003c\/strong\u003e\u003cbr\u003eBook alignment after installation\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eWorldwide tracked shipping\u003c\/strong\u003e\u003cbr\u003eDelivery in 4-6 weeks, tracking provided\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat exactly does a subframe drop fix?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eWhen you lift the vehicle body, the front subframe stays at its original height. This puts the CV joints, driveshafts, and control arms at incorrect angles relative to the wheels — causing vibration, CV joint stress, and accelerated drivetrain wear. The subframe drop kit repositions the subframe downward to restore correct geometry.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this required for a 2-inch lift or only for 3 inches?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eRecommended for 2-inch lifts and essentially required at 3 inches. We recommend fitting the subframe drop on any lift of 2 inches or more for long-term drivetrain health.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs a wheel alignment required after installation?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — a full wheel alignment is required after subframe drop installation. The alignment cannot be properly set without this step.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat warranty does this come with?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003e1-year warranty.\u003c\/strong\u003e Free replacement parts for any defect or failure within 12 months. Contact info@overlandtrek.com with your order number.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat else do I need for a complete geometry correction?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSubframe Drop Kit, Tubular Upper Control Arms, Adjustable Sway Bar End Links, and Adjustable Level Sensor Links (for air suspension vehicles). Email info@overlandtrek.com and we will send a complete parts list for your vehicle and lift height.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I install this myself?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe job requires safely supporting and lowering the front subframe. Professional installation is strongly recommended. Instructions are included.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhere does this ship from and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we are happy to help you plan your complete build.\u003c\/p\u003e\n\u003c\/details\u003e\n","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":47761483497693,"sku":"OT-UNI-LK-SDK","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/porsche-cayenne-vw-touareg-audi-q7-subframe-drop-kit-2-3-inch-liftlift-suspension-systemoverlandtrekoverlandtrekot-uni-lk-sdk1-624b8da6-0ae9-4644-8432-28065a384-7126214.png?v=1781235427"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/collections\/lift-kits-9576838.png?v=1781235325","url":"https:\/\/www.overlandtrek.com\/collections\/lift-kits.oembed","provider":"Overlandtrek","version":"1.0","type":"link"}