{"title":"Rear Bumper","description":"\u003cp\u003e\u003cstrong\u003eOff-Road Rear Bumpers for Porsche Cayenne, VW Touareg \u0026amp; Lexus GX550\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOverlandtrek rear bumpers are engineered for serious overland use — built to deliver real rear-end protection, improved departure angles, and heavy-duty recovery capability. Every bumper is a direct bolt-on replacement that uses factory mounting points, so installation requires no cutting, welding, or permanent modifications.\u003c\/p\u003e\u003cp\u003eOur range includes \u003cstrong\u003estandard off-road rear bumpers\u003c\/strong\u003e for clean, low-profile builds and \u003cstrong\u003edual swingout rear bumpers\u003c\/strong\u003e for expedition vehicles that need to carry a full-size spare tire, jerry cans, recovery gear, or a high-lift jack. Each bumper features a raised rear hitch mounting point for improved departure angle and reinforced recovery points rated for trail recovery and winching.\u003c\/p\u003e\u003ch3\u003eVehicles Covered\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePorsche Cayenne 955 (2002–2007)\u003c\/li\u003e\n\u003cli\u003ePorsche Cayenne 957 (2008–2010)\u003c\/li\u003e\n\u003cli\u003eVolkswagen Touareg (2002–2010)\u003c\/li\u003e\n\u003cli\u003eLexus GX550 (2024+)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features Across the Range\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty steel construction with CNC bending for OEM-grade fit\u003c\/li\u003e\n\u003cli\u003eRaised rear hitch mounting point for improved departure angle\u003c\/li\u003e\n\u003cli\u003eReinforced recovery points rated for trail recovery and winching\u003c\/li\u003e\n\u003cli\u003eDual swingout variants for spare tire and jerry can mounting\u003c\/li\u003e\n\u003cli\u003eMIG-welded heavy-duty pivot mounts on swingout models\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation using factory mounting points\u003c\/li\u003e\n\u003cli\u003eUV-stable, corrosion-resistant powder-coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf you're building a Cayenne, Touareg, or GX550 for real expedition use — carrying a spare, fuel, water, and recovery gear off-grid — a heavy-duty rear bumper is essential. Pair with our \u003cstrong\u003ematching front bumpers\u003c\/strong\u003e, \u003cstrong\u003emodular roof racks\u003c\/strong\u003e, and \u003cstrong\u003eunderbody skid plate kits\u003c\/strong\u003e for complete trail-ready protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCustom builds welcome.\u003c\/strong\u003e Contact us at info@overlandtrek.com for fitment questions or custom configurations. We build to order and ship worldwide.\u003c\/p\u003e","products":[{"product_id":"porsche-cayenne-955-off-road-rear-bumper-2002-2007","title":"Porsche Cayenne 955 Off-Road Rear Bumper (2002–2007)","description":"\u003cp\u003e\u003cstrong\u003eOff-Road Rear Bumper for Porsche Cayenne 955 (2002–2007)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCrafted for ultimate strength and an enhanced departure angle, the Overlandtrek Off-Road Rear Bumper turns your 955 Cayenne into a serious trail-ready platform. Built for overlanders who need real recovery capability and rear-end protection without compromising the Cayenne's clean lines.\u003c\/p\u003e\n\u003cp\u003eEngineered specifically for the 2002–2007 Porsche Cayenne 955, this bumper is a direct bolt-on replacement that uses your factory mounting points — no cutting, no welding, no permanent modifications.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Carbon Manganese Steel construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50mm material thickness\u003c\/strong\u003e — heavy-gauge plate that stands up to rock strikes, brush, and trail debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — mounts to factory points without affecting your sensors, lighting, airbag, or other vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaised rear hitch mounting point\u003c\/strong\u003e for improved departure angle on the trail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC bending\u003c\/strong\u003e for clean, accurate transitions and a precision OEM-grade fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced recovery points\u003c\/strong\u003e rated for trail recovery and winching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved departure angle\u003c\/strong\u003e for steeper exits and rock crawling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation — What You'll Need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Intermediate — DIY-friendly with basic mechanical experience\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 2–4 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools required:\u003c\/strong\u003e Floor jack, jack stands, basic socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling:\u003c\/strong\u003e None — uses factory mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanent modifications:\u003c\/strong\u003e None — fully reversible to stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Porsche Cayenne 955 (Gen 1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears:\u003c\/strong\u003e 2002, 2003, 2004, 2005, 2006, 2007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrims:\u003c\/strong\u003e Base, S, Turbo, Turbo S, GTS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePorsche Cayenne 955 Off-Road Rear Bumper Built for Durability\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Porsche Cayenne 955 off-road rear bumper is engineered with heavy-duty High-Carbon Manganese Steel that guarantees long-lasting durability and superior rear-end protection. Its rugged design not only enhances the vehicle's aggressive look but also provides excellent resistance against rock strikes and trail debris. Tailored specifically for the 2002–2007 Cayenne, this Porsche Cayenne 955 off-road rear bumper maintains structural integrity without compromising on style, making it an essential upgrade for serious overland builds.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEnhanced Off-Road Functionality of the Porsche Cayenne 955 Off-Road Rear Bumper\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDesigned for the challenges of overland and trail use, the Porsche Cayenne 955 off-road rear bumper offers a raised hitch mount and improved departure angle for steeper exits and rock crawling. This allows your vehicle to clear obstacles more efficiently. Additionally, the Porsche Cayenne 955 off-road rear bumper includes reinforced recovery points rated for winching and strap recovery, giving you the flexibility to handle any trail situation. Such features significantly improve vehicle capability in demanding environments.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Vehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe Porsche Cayenne 955 off-road rear bumper is crafted for a precise fit on the 2002–2007 Gen 1 platform, ensuring seamless integration with factory mounting points. Installation of the Porsche Cayenne 955 off-road rear bumper is straightforward, requiring no cutting, drilling, or welding. This ease of installation helps owners upgrade quickly, letting them get back to exploring off-road without delay. Compatibility and simplicity are key benefits valued by Cayenne owners running this bumper.\u003c\/p\u003e\n\u003ch3\u003eBuilt for the Trail\u003c\/h3\u003e\n\u003cp\u003ePair this rear bumper with our \u003ca href=\"\/collections\/front-bumper\"\u003e\u003cstrong\u003ematching front bumper\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/collections\/roof-rack\"\u003e\u003cstrong\u003emodular roof rack\u003c\/strong\u003e\u003c\/a\u003e, and \u003ca href=\"\/collections\/underbody-protection\"\u003e\u003cstrong\u003eunderbody skid plate kit\u003c\/strong\u003e\u003c\/a\u003e for a complete expedition build.\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 1px; background: #e0e0e0; border: 1px solid #e0e0e0; border-radius: 8px; overflow: hidden; margin: 24px 0;\"\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eDirect bolt-on fitment\u003c\/strong\u003e\u003cbr\u003eNo cutting, drilling, or modifications\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eWorldwide tracked shipping\u003c\/strong\u003e\u003cbr\u003eDelivery in 4-6 weeks, tracking provided\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eBuilt to order\u003c\/strong\u003e\u003cbr\u003eManufactured to spec at our facility\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eExpert support\u003c\/strong\u003e\u003cbr\u003eEmail info@overlandtrek.com anytime\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this fit my specific Cayenne 955?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. This bumper fits all Porsche Cayenne 955 (Gen 1) trims — Base, S, Turbo, Turbo S, and GTS — from 2002 to 2007. It bolts directly onto your factory mounting points with no modifications needed.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDo I need to cut or drill anything?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. This is a true bolt-on replacement. Remove the factory rear bumper, bolt the Overlandtrek bumper to the existing factory mounting points, and you're done. No cutting, drilling, or welding.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhere does this ship from, and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eAll Overlandtrek products are manufactured at our facility and ship worldwide with full tracking. Delivery typically takes 4–6 weeks. You will receive a tracking number as soon as your order ships.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I install this myself?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Most owners complete installation at home with basic hand tools in 2–4 hours. Full installation instructions are included.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I upgrade to the swingout version later?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eWe offer the \u003ca href=\"\/products\/porsche-cayenne-955-dual-axle-rear-bumper-with-tow-hitch\"\u003e\u003cstrong\u003eDual Swingout Rear Bumper\u003c\/strong\u003e\u003c\/a\u003e as a separate product — built on the same platform with two independently locking swing-out arms for spare tire and jerry can mounting.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we're happy to help with fitment, specs, build advice, or custom orders.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":46444542558429,"sku":"OT-C955-RB-STD","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/dual-swingout-rear-bumper-955-cayenne-02-07rear-bumperoverlandtrekoverlandtrekot-c955-rb-dso05c749914ceb6f0e401d50aac1cec636-191ea22b-7462-4893-a602-b421ac10ca1-6916747.jpg?v=1779756047"},{"product_id":"porsche-cayenne-955-dual-swingout-rear-bumper-2002-2007","title":"Porsche Cayenne 955 Dual Swingout Rear Bumper (2002–2007)","description":"\u003cp\u003e\u003cstrong\u003eDual Swingout Rear Bumper for Porsche Cayenne 955 (2002–2007)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Overlandtrek Dual Swingout Rear Bumper is the definitive expedition rear end for the 955 Cayenne — two independently lockable swing-out arms for a full-size spare, jerry cans, recovery gear, or a high-lift jack, all on a platform that retains your factory exhaust and opens your tailgate normally. Built for owners who are serious about long-range overland travel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo cutting. No welding. No exhaust modifications. No permanent changes to your vehicle.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Carbon Manganese Steel construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50mm material thickness\u003c\/strong\u003e — heavy-gauge plate that stands up to rock strikes, brush, and trail debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — mounts to factory points without affecting your sensors, lighting, airbag, or other vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50mm manganese steel tube construction\u003c\/strong\u003e — the same high-strength alloy used in competitive off-road builds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual independently locking swing-out arms\u003c\/strong\u003e — rated at \u003cstrong\u003e50 kg load capacity\u003c\/strong\u003e per arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare tire carrier included\u003c\/strong\u003e — mounts full-size spare up to 50 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom 3-gallon fuel can mount\u003c\/strong\u003e — designed for the included jerry can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing arms are fully removable\u003c\/strong\u003e — remove for daily driving, reinstall in minutes for off-road or camping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory exhaust fully retained\u003c\/strong\u003e — only the lower factory bumper trim is removed; the muffler, exhaust tips, and all emissions components remain untouched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormal tailgate operation\u003c\/strong\u003e — swing one or both arms open like a door, then open the tailgate as normal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaised rear hitch mounting point\u003c\/strong\u003e for improved departure angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced recovery points\u003c\/strong\u003e rated for trail recovery and winching\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube material:\u003c\/strong\u003e Manganese steel, 50mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing arm load capacity:\u003c\/strong\u003e 50 kg per arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJerry can capacity:\u003c\/strong\u003e 3 gallons (custom-sized, included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured e-coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation — What You'll Need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Intermediate — two people recommended due to weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 3–5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools required:\u003c\/strong\u003e Floor jack, jack stands, basic socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling:\u003c\/strong\u003e None — uses factory mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBodywork experience:\u003c\/strong\u003e Not required — the lower factory bumper trim is clip-on (no tools needed to remove)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Porsche Cayenne 955 (Gen 1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears:\u003c\/strong\u003e 2002, 2003, 2004, 2005, 2006, 2007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrims:\u003c\/strong\u003e Base, S, Turbo, Turbo S, GTS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePorsche Cayenne 955 Dual Swingout Rear Bumper Built for Durability\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Porsche Cayenne 955 dual swingout rear bumper is engineered with 50mm manganese steel tube construction that guarantees long-lasting durability and superior expedition-grade strength. Its rugged design not only enhances the vehicle's aggressive look but also provides excellent resistance against rock strikes and trail debris. Tailored specifically for the 2002–2007 Cayenne, this Porsche Cayenne 955 dual swingout rear bumper maintains structural integrity without compromising on style, making it an essential upgrade for serious overland builds.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEnhanced Off-Road Functionality of the Porsche Cayenne 955 Dual Swingout Rear Bumper\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eDesigned for long-range overland travel, the Porsche Cayenne 955 dual swingout rear bumper features two independently locking swing-out arms rated at 50 kg each for a full-size spare, jerry cans, or recovery gear. This allows your vehicle to carry serious expedition loads without compromise. Additionally, the Porsche Cayenne 955 dual swingout rear bumper includes a raised hitch mount and reinforced recovery points, giving you improved departure angles and dependable winching capability. Such features significantly improve vehicle capability in demanding environments.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Vehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe Porsche Cayenne 955 dual swingout rear bumper is crafted for a precise fit on the 2002–2007 Gen 1 Cayenne, ensuring seamless integration with factory mounting points. Installation of the Porsche Cayenne 955 dual swingout rear bumper requires no cutting, drilling, or welding, and the factory exhaust stays fully retained. This ease of installation helps owners upgrade quickly, letting them get back to exploring without delay. Compatibility and simplicity are key benefits valued by Cayenne owners running this bumper.\u003c\/p\u003e\n\u003ch3\u003eWhat Gets Removed at Installation\u003c\/h3\u003e\n\u003cp\u003eOnly the \u003cstrong\u003elower section of the factory rear bumper trim\u003c\/strong\u003e (held in place by clips — no tools needed) is removed and replaced by this bumper. The upper factory bumper section, the factory exhaust system, muffler, exhaust tips, and all emissions-related components are completely retained. No cutting, drilling, or welding to the vehicle.\u003c\/p\u003e\n\u003ch3\u003eBuilt for the Trail\u003c\/h3\u003e\n\u003cp\u003ePair this swingout rear bumper with our \u003ca href=\"\/collections\/front-bumper\"\u003e\u003cstrong\u003ematching 955 front bumper\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/collections\/roof-rack\"\u003e\u003cstrong\u003emodular roof rack\u003c\/strong\u003e\u003c\/a\u003e, and \u003ca href=\"\/collections\/underbody-protection\"\u003e\u003cstrong\u003eunderbody skid plate kit\u003c\/strong\u003e\u003c\/a\u003e for a complete expedition build.\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 1px; background: #e0e0e0; border: 1px solid #e0e0e0; border-radius: 8px; overflow: hidden; margin: 24px 0;\"\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eFactory exhaust retained\u003c\/strong\u003e\u003cbr\u003eNo muffler removal. All emissions components untouched.\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003e50 kg arm load rating\u003c\/strong\u003e\u003cbr\u003eRated capacity per swing arm\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eTailgate opens normally\u003c\/strong\u003e\u003cbr\u003eSwing the arm open like a door, then open your hatch\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eArms are removable\u003c\/strong\u003e\u003cbr\u003eRemove for daily driving, reinstall for off-road\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes this bumper require removing the factory exhaust or muffler?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo — and this is important. Only the \u003cstrong\u003elower clip-on section of the factory rear bumper trim\u003c\/strong\u003e is removed. The muffler, exhaust tips, and all factory emissions components are completely retained. This bumper is suitable for use in California and all other emissions-regulated states without any exhaust modifications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I still open the tailgate normally?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Swing one or both arms outward (they operate like a door), then open your tailgate as normal. The arms are independently operated — you only need to open the side you need access from.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the load capacity of the swing arms?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEach swing arm is rated at \u003cstrong\u003e50 kg\u003c\/strong\u003e. This is sufficient for a full-size spare wheel and tyre on one arm, and jerry cans or recovery gear on the other. Do not exceed 50 kg per arm.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan the swing arms be removed for daily driving?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — the arms are fully removable. Remove them for everyday driving and reinstall quickly when heading off-road or camping. The base bumper remains in place permanently.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat can I mount on the swing arms?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSpare tire carrier is included (rated to 50 kg). A custom 3-gallon jerry can is also included and sized specifically for this bumper. For other accessories, contact us at info@overlandtrek.com to confirm compatibility.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this fit my Cayenne 955?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — fits all 2002–2007 Porsche Cayenne 955 trims: Base, S, Turbo, Turbo S, and GTS. Direct bolt-on, no modifications required.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhere does this ship from and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks. Tracking provided once shipped.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we're happy to help with fitment, load ratings, or build advice.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":46444548194525,"sku":"OT-C955-RB-DSO","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/dual-swingout-rear-bumper-955-cayenne-02-07rear-bumperoverlandtrekoverlandtrekot-c955-rb-dsoa93842ca49ee2cd215552dce919c1e4d-9224711.jpg?v=1779756041"},{"product_id":"porsche-cayenne-957-rear-bumper-2008-2010","title":"Porsche Cayenne 957 Rear Bumper (2008–2010)","description":"\u003ch2 id=\"tinymce_scroll_sign\"\u003ePremium Porsche Cayenne 957 Rear Bumper for Off-Road Performance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOff-Road Rear Bumper for Porsche Cayenne 957 (2008–2010)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCrafted for ultimate strength and an enhanced departure angle, the Overlandtrek Off-Road Rear Bumper turns your 957 Cayenne into a serious trail-ready platform. Built specifically for the Gen 1 facelift.\u003c\/p\u003e\n\u003cp\u003eDirect bolt-on fitment for the 2008–2010 Porsche Cayenne 957. Uses factory mounting points — no cutting, no welding, no permanent modifications.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Carbon Manganese Steel construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50mm material thickness\u003c\/strong\u003e — heavy-gauge plate that stands up to rock strikes, brush, and trail debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — mounts to factory points without affecting your sensors, lighting, airbag, or other vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaised rear hitch mounting point\u003c\/strong\u003e for improved departure angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced recovery points\u003c\/strong\u003e rated for trail recovery and winching\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation — What You'll Need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Intermediate — DIY-friendly with basic mechanical experience\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 2–4 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools required:\u003c\/strong\u003e Floor jack, jack stands, basic socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling:\u003c\/strong\u003e None — uses factory mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanent modifications:\u003c\/strong\u003e None — fully reversible to stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Porsche Cayenne 957 (Gen 1 Facelift)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears:\u003c\/strong\u003e 2008, 2009, 2010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrims:\u003c\/strong\u003e Base, S, Turbo, Turbo S, GTS, Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDurable Construction Designed for Off-Road Toughness\u003c\/h2\u003e\n\u003cp\u003eThe Porsche Cayenne 957 rear bumper is engineered to withstand the demanding conditions of off-road driving. Crafted from heavy-duty High-Carbon Manganese Steel, this bumper offers excellent impact resistance and durability. Its robust design ensures maximum protection for the rear of your 2008–2010 Porsche Cayenne, helping to shield the vehicle from rocks, mud, and debris. The rugged build not only enhances safety but also contributes to a tough, sporty aesthetic that matches the adventurous spirit of your vehicle. With this rear bumper, you can confidently tackle rough terrains without worrying about damage.\u003c\/p\u003e\n\u003ch3\u003eSeamless Fitment Specifically Tailored for 2008–2010 Models\u003c\/h3\u003e\n\u003cp\u003ePrecision-engineered to fit the Porsche Cayenne 957 model years 2008 through 2010, this rear bumper guarantees a flawless installation process. The design respects the original contours and mounting points of your vehicle, ensuring a secure and stable attachment. This perfect fit enhances both the visual appeal and functional integrity of your car. By matching the factory specifications, it maintains optimal aerodynamics and prevents any compromise to your Cayenne’s performance. Whether you are replacing a damaged bumper or upgrading for off-road durability, this part is a smart choice for seamless integration.\u003c\/p\u003e\n\u003ch3\u003eStylish Design Balancing Form and Function\u003c\/h3\u003e\n\u003cp\u003eBeyond its strength and fit, the Porsche Cayenne 957 rear bumper blends style with practicality. The off-road oriented design features a sleek yet aggressive appearance that complements the SUV’s sporty profile. Its e-coating finish and angular lines add character while allowing easy customization such as adding tow hooks or lighting accessories. This bumper not only protects but elevates the vehicle’s overall look, signaling readiness for any outdoor adventure. Investing in this rear bumper means enhancing your Cayenne’s durability without sacrificing visual appeal.\u003c\/p\u003e\n\u003ch3\u003eBuilt for the Trail\u003c\/h3\u003e\n\u003cp\u003ePair this rear bumper with our \u003ca href=\"\/collections\/front-bumper\"\u003e\u003cstrong\u003ematching 957 front bumper\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/collections\/roof-rack\"\u003e\u003cstrong\u003emodular roof rack\u003c\/strong\u003e\u003c\/a\u003e, and \u003ca href=\"\/collections\/underbody-protection\"\u003e\u003cstrong\u003eunderbody skid plate kit\u003c\/strong\u003e\u003c\/a\u003e for a complete expedition build.\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 1px; background: #e0e0e0; border: 1px solid #e0e0e0; border-radius: 8px; overflow: hidden; margin: 24px 0;\"\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eDirect bolt-on fitment\u003c\/strong\u003e\u003cbr\u003eNo cutting, drilling, or modifications\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eWorldwide tracked shipping\u003c\/strong\u003e\u003cbr\u003eDelivery in 4-6 weeks, tracking provided\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eBuilt to order\u003c\/strong\u003e\u003cbr\u003eManufactured to spec at our facility\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eExpert support\u003c\/strong\u003e\u003cbr\u003eEmail info@overlandtrek.com anytime\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this fit my 957 Cayenne?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — fits all 2008–2010 Porsche Cayenne 957 trims: Base, S, GTS, Turbo, Turbo S, Diesel. Not compatible with the 955 (2002–2007).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDo I need to cut or drill anything?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. Direct bolt-on using factory mounting points. No modifications required.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhere does this ship from, and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I upgrade to the swingout version?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — the \u003ca href=\"\/products\/porsche-cayenne-957-dual-axle-rear-bumper2004-2010\"\u003e\u003cstrong\u003eDual Swingout Rear Bumper for the 957\u003c\/strong\u003e\u003c\/a\u003e is available separately, built on the same platform with two independently locking swing-out arms for spare tire and jerry can mounting.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we're happy to help.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":46444550258909,"sku":"OT-C957-RB-STD","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/offroad-rear-bumper-957-cayenne-08-10rear-bumperoverlandtrekoverlandtrekot-c957-rb-std1-9f200b31-bf2f-4c79-b8bb-1427c9e8fb84-1803732.jpg?v=1779756061"},{"product_id":"porsche-cayenne-957-rear-bumper","title":"Porsche Cayenne 957 Rear Bumper (2008–2010) Dual Swingout","description":"\u003ch2 id=\"tinymce_scroll_sign\"\u003ePorsche Cayenne 957 Rear Bumper: Durable Dual Swingout Design (2008–2010)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDual Swingout Rear Bumper for Porsche Cayenne 957 (2008–2010)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Overlandtrek Porsche Cayenne 957 Rear Bumper (2008–2010) Dual Swingout delivers the full expedition rear-end setup — two independently lockable swing-out arms, a 50 kg rated spare tire carrier, and a 3-gallon custom jerry can mount — all without touching your factory exhaust system or requiring any cutting or welding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo cutting. No welding. No exhaust modifications. No permanent changes to your vehicle.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Carbon Manganese Steel construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50mm material thickness\u003c\/strong\u003e — heavy-gauge plate that stands up to rock strikes, brush, and trail debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — mounts to factory points without affecting your sensors, lighting, airbag, or other vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50mm manganese steel tube construction\u003c\/strong\u003e — high-strength alloy built for serious off-road impacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual independently locking swing-out arms\u003c\/strong\u003e — rated at \u003cstrong\u003e50 kg load capacity\u003c\/strong\u003e per arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare tire carrier included\u003c\/strong\u003e — mounts full-size spare up to 50 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom 3-gallon fuel can mount\u003c\/strong\u003e — designed for the included jerry can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing arms are fully removable\u003c\/strong\u003e — remove for daily driving, reinstall in minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory exhaust fully retained\u003c\/strong\u003e — only the lower factory bumper trim (clip-on) is removed; muffler, exhaust tips, and all emissions components remain untouched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormal tailgate operation\u003c\/strong\u003e — swing the arm open, then open your tailgate as usual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaised rear hitch mounting point\u003c\/strong\u003e for improved departure angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced recovery points\u003c\/strong\u003e rated for trail recovery and winching\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube material:\u003c\/strong\u003e Manganese steel, 50mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing arm load capacity:\u003c\/strong\u003e 50 kg per arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJerry can capacity:\u003c\/strong\u003e 3 gallons (custom-sized, included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured e-coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation — What You'll Need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Intermediate — two people recommended due to weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 3–5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools required:\u003c\/strong\u003e Floor jack, jack stands, basic socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling:\u003c\/strong\u003e None — uses factory mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBodywork experience:\u003c\/strong\u003e Not required — the lower factory bumper trim is clip-on (no tools needed to remove)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Porsche Cayenne 957 (Gen 1 Facelift)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears:\u003c\/strong\u003e 2008, 2009, 2010\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrims:\u003c\/strong\u003e Base, S, Turbo, Turbo S, GTS, Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible\u003c\/strong\u003e with Cayenne 955 (2002–2007)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePrecision Fitment for Porsche Cayenne 957 (2008–2010)\u003c\/h2\u003e\n\u003cp\u003eThe Porsche Cayenne 957 rear bumper is engineered specifically for the 2008 to 2010 models, ensuring a precise and secure fit. Designed to align perfectly with the vehicle’s original dimensions, this bumper replacement maintains the sleek look and structural integrity unique to the Cayenne 957. Its compatibility with the dual swingout feature offers both style and enhanced access, making it an ideal choice for owners seeking an OEM-quality component. This careful design guarantees easy installation and seamless integration with your SUV’s existing bodywork and rear components.\u003c\/p\u003e\n\u003ch3\u003eRobust Construction and High-Quality Materials\u003c\/h3\u003e\n\u003cp\u003eCrafted from durable materials, the Porsche Cayenne 957 rear bumper provides superior impact resistance and long-lasting performance. The dual swingout design is reinforced to handle regular use, improving the rear cargo area’s accessibility without compromising safety. This bumper withstands tough driving conditions and weather elements, making it a reliable replacement that preserves the vehicle’s aesthetics while protecting its rear structure. Its resilient finish also resists scratches and corrosion, maintaining an attractive appearance over time.\u003c\/p\u003e\n\u003ch3\u003eEnhanced Functionality with Dual Swingout Feature\u003c\/h3\u003e\n\u003cp\u003eThe dual swingout rear bumper offers practical benefits by allowing two rear doors or panels to swing open sideways, increasing accessibility to the cargo area. This feature is especially useful for loading and unloading gear, improving convenience for day-to-day use or off-road trips. The design enhances the vehicle’s usability without sacrificing its sleek and sporty look. Whether you are upgrading a damaged bumper or want to improve your Porsche Cayenne 957’s rear functionality, this dual swingout rear bumper combines form and function effectively.\u003c\/p\u003e\n\u003ch3\u003eWhat Gets Removed at Installation\u003c\/h3\u003e\n\u003cp\u003eOnly the \u003cstrong\u003elower clip-on section of the factory rear bumper trim\u003c\/strong\u003e is removed — no tools required, it detaches by clips. The upper bumper section, factory exhaust, muffler, exhaust tips, and all emissions equipment are completely untouched.\u003c\/p\u003e\n\u003ch3\u003eBuilt for the Trail\u003c\/h3\u003e\n\u003cp\u003ePair this swingout rear bumper with our \u003ca href=\"\/collections\/front-bumper\"\u003e\u003cstrong\u003ematching 957 front bumper\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/collections\/roof-rack\"\u003e\u003cstrong\u003emodular roof rack\u003c\/strong\u003e\u003c\/a\u003e, and \u003ca href=\"\/collections\/underbody-protection\"\u003e\u003cstrong\u003eunderbody skid plate kit\u003c\/strong\u003e\u003c\/a\u003e for a complete expedition build.\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 1px; background: #e0e0e0; border: 1px solid #e0e0e0; border-radius: 8px; overflow: hidden; margin: 24px 0;\"\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eFactory exhaust retained\u003c\/strong\u003e\u003cbr\u003eNo muffler removal. All emissions components untouched.\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003e50 kg arm load rating\u003c\/strong\u003e\u003cbr\u003eRated capacity per swing arm\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eTailgate opens normally\u003c\/strong\u003e\u003cbr\u003eSwing arm open like a door, then open your hatch\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eArms are removable\u003c\/strong\u003e\u003cbr\u003eRemove for daily driving, reinstall for off-road\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes this bumper require removing the factory exhaust or muffler?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. Only the lower clip-on section of the factory rear bumper trim is removed — no cutting or tools needed, it simply unclips. The muffler, exhaust tips, and all factory emissions components are completely retained. Suitable for California and all emissions-regulated states without any exhaust modifications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I still open my tailgate normally?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Swing one or both arms outward like a door, then open the tailgate as normal. Arms are independently operated — open only the side you need.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the load capacity per arm?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEach swing arm is rated at \u003cstrong\u003e50 kg\u003c\/strong\u003e — sufficient for a full-size spare on one arm and jerry cans or recovery gear on the other.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan the swing arms be removed for daily driving?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — fully removable. Remove for everyday use, reinstall quickly for off-road or camping. The base bumper stays on permanently.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this fit my 957 Cayenne?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — fits all 2008–2010 Porsche Cayenne 957 trims. Not compatible with the 955 (2002–2007).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhere does this ship from and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we are happy to help.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":46444551766237,"sku":"OT-C957-RB-DSO","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/porsche-cayenne-957-rear-bumper-2008-2010-dual-swingoutrear-bumperoverlandtrekoverlandtrekot-c957-rb-dsoweixinimage-20260513171313-17-204-9620410.jpg?v=1781235432"},{"product_id":"lexus-gx550-rear-bumper","title":"Lexus GX550 Rear Bumper | Dual Swingout","description":"\u003ch2 id=\"tinymce_scroll_sign\"\u003eAll You Need to Know About the Lexus GX550 Rear Bumper Dual Swingout\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDual Swingout Rear Bumper for Lexus GX550\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Overlandtrek Dual Swingout Rear Bumper for the Lexus GX550 delivers the full expedition rear-end setup — two independently lockable swing-out arms rated at 50 kg each, a spare tire carrier, and a 3-gallon jerry can mount — with zero exhaust modifications and no permanent changes to your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo cutting. No welding. No exhaust modifications. No permanent changes to your vehicle.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7075 Aluminum Alloy construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50mm material thickness\u003c\/strong\u003e — heavy-gauge plate that stands up to rock strikes, brush, and trail debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — mounts to factory points without affecting your sensors, lighting, airbag, or other vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50mm aluminum alloy tube construction\u003c\/strong\u003e — high-strength alloy for serious off-road impacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual independently locking swing-out arms\u003c\/strong\u003e — rated at \u003cstrong\u003e50 kg load capacity\u003c\/strong\u003e per arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare tire carrier included\u003c\/strong\u003e — mounts full-size spare up to 50 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom 3-gallon fuel can mount\u003c\/strong\u003e — sized specifically for this bumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing arms fully removable\u003c\/strong\u003e — remove for daily driving, reinstall for off-road or camping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory exhaust fully retained\u003c\/strong\u003e — only the lower clip-on factory bumper trim is removed; muffler and all emissions components untouched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormal tailgate operation\u003c\/strong\u003e — swing the arm open, then open the tailgate as usual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaised rear hitch mounting point\u003c\/strong\u003e for improved departure angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced recovery points\u003c\/strong\u003e for winching and trail recovery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube material:\u003c\/strong\u003e 7075 aluminum alloy, 50mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing arm load capacity:\u003c\/strong\u003e 50 kg per arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJerry can capacity:\u003c\/strong\u003e 3 gallons (custom-sized, included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured e-coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation — What You'll Need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Intermediate — two people recommended due to weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 3–5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools required:\u003c\/strong\u003e Floor jack, jack stands, basic socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling:\u003c\/strong\u003e None — uses factory mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBodywork experience:\u003c\/strong\u003e Not required — the lower factory bumper trim is clip-on (no tools needed to remove)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Lexus GX550\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears:\u003c\/strong\u003e 2024+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Gets Removed at Installation\u003c\/h3\u003e\n\u003cp\u003eOnly the \u003cstrong\u003elower clip-on section of the factory rear bumper trim\u003c\/strong\u003e is removed — no cutting, drilling, or specialist tools required. The upper bumper section, factory exhaust system, muffler, and all emissions components remain completely untouched.\u003c\/p\u003e\n\u003ch3\u003eBuilt for the Trail\u003c\/h3\u003e\n\u003cp\u003ePair this GX550 swingout rear bumper with our \u003ca href=\"\/products\/off-front-bumper-lexus-gx-550\"\u003e\u003cstrong\u003ematching GX550 front bumper\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/collections\/underbody-protection\"\u003e\u003cstrong\u003eunderbody skid plate kit\u003c\/strong\u003e\u003c\/a\u003e, and \u003ca href=\"\/collections\/roof-rack\"\u003e\u003cstrong\u003emodular roof rack\u003c\/strong\u003e\u003c\/a\u003e for a complete expedition build.\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 1px; background: #e0e0e0; border: 1px solid #e0e0e0; border-radius: 8px; overflow: hidden; margin: 24px 0;\"\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eFactory exhaust retained\u003c\/strong\u003e\u003cbr\u003eNo muffler removal. All emissions components untouched.\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003e50 kg arm load rating\u003c\/strong\u003e\u003cbr\u003eRated capacity per swing arm\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eTailgate opens normally\u003c\/strong\u003e\u003cbr\u003eSwing arm open like a door, then open your hatch\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eArms are removable\u003c\/strong\u003e\u003cbr\u003eRemove for daily driving, reinstall for off-road\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes this bumper require removing the factory exhaust or muffler?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. Only the lower clip-on section of the factory rear bumper trim is removed — it simply unclips, no cutting or tools required. The factory muffler, exhaust tips, and all emissions components are completely untouched. Suitable for California and all emissions-regulated states without any exhaust modifications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I still open my tailgate normally?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Swing one or both arms outward like a door, then open the tailgate as you normally would. Each arm is independently operated — open only the side you need.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the load capacity per arm?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEach swing arm is rated at \u003cstrong\u003e50 kg\u003c\/strong\u003e. Sufficient for a full-size spare on one arm and jerry cans or recovery gear on the other.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan the swing arms be removed for daily driving?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — fully removable. Remove for daily use, reinstall quickly when going off-road or camping. The base bumper stays on permanently.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this fit my GX550?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — designed specifically for the Lexus GX550 (2024+). Direct bolt-on, no modifications required.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhere does this ship from and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we are happy to help.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDurable Construction and Design\u003c\/h3\u003e\n\u003cp\u003eThe Lexus GX550 rear bumper is engineered for strength and longevity, crafted from high-grade 7075 aluminum alloy with an e-coating finish to resist rust and corrosion. This dual swingout design offers enhanced rear protection while maintaining an aggressive style that complements your vehicle. Designed specifically for the Lexus GX550, the bumper ensures perfect fitment and seamless integration with your existing setup. Its rugged construction makes it ideal for off-road adventures, providing reliable defense against impacts and obstacles.\u003c\/p\u003e\n\u003ch3\u003eEnhanced Functionality with Dual Swingout Feature\u003c\/h3\u003e\n\u003cp\u003eThe standout feature of the Lexus GX550 rear bumper is its dual swingout arms, which provide easy access to rear cargo and roof rack areas without having to remove the entire bumper. This functionality vastly improves usability, especially on trails or during outdoor activities where quick loading and unloading are essential. The swingout gates are equipped with sturdy hinges and locking mechanisms to keep them secure during transit, adding both convenience and peace of mind.\u003c\/p\u003e\n\u003ch3\u003eImproved Safety and Utility\u003c\/h3\u003e\n\u003cp\u003eIn addition to protection, the Lexus GX550 rear bumper comes with provisions for mounting spare tires, recovery gear, and auxiliary lights, increasing your vehicle’s utility and preparedness. The bumper enhances safety by providing reinforced rear coverage that absorbs impact energy more effectively than stock bumpers. Its design also includes integrated recovery points, allowing you to attach tow hooks or winches easily. Overall, this product boosts the GX550’s functionality and rugged appeal on and off the road.\u003c\/p\u003e\n","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":47624561721565,"sku":"OT-GX5-RB-DSO","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/dual-swingout-rear-bumper-lexus-gx550rear-bumperoverlandtrekoverlandtrekot-gx5-rb-dso1-ad69093c-1556-4f59-befc-3b41dec1dd2b-2209374.jpg?v=1778490549"},{"product_id":"vw-touareg-dual-swingout-rear-bumper-2002-2010","title":"VW Touareg Dual Swingout Rear Bumper (2002–2010)","description":"\u003cp\u003e\u003cstrong\u003eDual Swingout Rear Bumper for Volkswagen Touareg (2002–2010)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/dual-swingout-rear-bumper-touareg-02-10rear-bumperoverlandtrekoverlandtrekot-trg-rb-dso1-38de8c57-b9e3-4c7e-bc51-005b63757b65-4167300.jpg?v=1778490553\" alt=\"VW Touareg Dual Swingout Rear Bumper installed on 2002-2010 Touareg\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Overlandtrek VW Touareg Dual Swingout Rear Bumper for the Gen 1 Touareg delivers the full expedition rear-end setup — two independently lockable swing-out arms rated at 50 kg each, a spare tire carrier, and a 3-gallon jerry can mount — with no exhaust modifications, no cutting, and no welding required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo cutting. No welding. No exhaust modifications. No permanent changes to your vehicle.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Carbon Manganese Steel construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50mm material thickness\u003c\/strong\u003e — heavy-gauge plate that stands up to rock strikes, brush, and trail debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — mounts to factory points without affecting your sensors, lighting, airbag, or other vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50mm manganese steel tube construction\u003c\/strong\u003e — high-strength alloy for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual independently locking swing-out arms\u003c\/strong\u003e — rated at \u003cstrong\u003e50 kg load capacity\u003c\/strong\u003e per arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare tire carrier included\u003c\/strong\u003e — mounts full-size spare up to 50 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom 3-gallon fuel can mount\u003c\/strong\u003e — sized specifically for this bumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing arms fully removable\u003c\/strong\u003e — remove for daily driving, reinstall for off-road\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory exhaust fully retained\u003c\/strong\u003e — only the lower clip-on factory bumper trim is removed; muffler and all emissions components untouched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormal tailgate operation\u003c\/strong\u003e — swing the arm open, tailgate opens as usual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaised rear hitch mounting point\u003c\/strong\u003e for improved departure angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced recovery points\u003c\/strong\u003e for winching and trail recovery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube material:\u003c\/strong\u003e Manganese steel, 50mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing arm load capacity:\u003c\/strong\u003e 50 kg per arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJerry can capacity:\u003c\/strong\u003e 3 gallons (custom-sized, included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured e-coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation — What You'll Need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Intermediate — two people recommended due to weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 3–5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools required:\u003c\/strong\u003e Floor jack, jack stands, basic socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling:\u003c\/strong\u003e None — uses factory mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBodywork experience:\u003c\/strong\u003e Not required — the lower factory bumper trim is clip-on (no tools needed to remove)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Volkswagen Touareg Gen 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears:\u003c\/strong\u003e 2002–2010\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/dual-swingout-rear-bumper-touareg-02-10rear-bumperoverlandtrekoverlandtrekot-trg-rb-dso2-e5385827-4418-435f-9736-3832600e686e-6612617.jpg?v=1778490553\" alt=\"VW Touareg Dual Swingout Rear Bumper close-up swing arm and spare tire carrier detail\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhat Gets Removed at Installation\u003c\/h3\u003e\n\u003cp\u003eOnly the \u003cstrong\u003elower clip-on section of the factory rear bumper trim\u003c\/strong\u003e is removed — no cutting, drilling, or tools required. The upper bumper section, factory exhaust system, muffler, and all emissions components remain completely untouched.\u003c\/p\u003e\n\n\u003ch3\u003eBuilt for the Trail\u003c\/h3\u003e\n\u003cp\u003ePair this Touareg swingout rear bumper with our \u003ca href=\"\/collections\/front-bumper\"\u003e\u003cstrong\u003ematching Touareg front bumper\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/collections\/roof-rack\"\u003e\u003cstrong\u003emodular roof rack\u003c\/strong\u003e\u003c\/a\u003e, and \u003ca href=\"\/collections\/underbody-protection\"\u003e\u003cstrong\u003eunderbody skid plate kit\u003c\/strong\u003e\u003c\/a\u003e for a complete expedition build.\u003c\/p\u003e\n\n\u003cdiv style=\"display:grid;grid-template-columns:1fr 1fr;gap:1px;background:#e0e0e0;border:1px solid #e0e0e0;border-radius:8px;overflow:hidden;margin:24px 0;\"\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eFactory exhaust retained\u003c\/strong\u003e\u003cbr\u003eNo muffler removal. All emissions components untouched.\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003e50 kg arm load rating\u003c\/strong\u003e\u003cbr\u003eRated capacity per swing arm\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eTailgate opens normally\u003c\/strong\u003e\u003cbr\u003eSwing arm open like a door, then open your hatch\u003c\/div\u003e\n\u003cdiv style=\"background:#f8f8f8;padding:14px 18px;font-size:14px;line-height:1.5;\"\u003e✅ \u003cstrong\u003eArms are removable\u003c\/strong\u003e\u003cbr\u003eRemove for daily driving, reinstall for off-road\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDoes this bumper require removing the factory exhaust or muffler?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eNo. The VW Touareg Dual Swingout Rear Bumper only requires removing the lower clip-on section of the factory rear bumper trim — it simply unclips, no cutting or tools required. The factory muffler, exhaust tips, and all emissions components are completely untouched. Suitable for California and all emissions-regulated regions without any exhaust modifications.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eCan I still open my tailgate normally?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes. Swing one or both arms outward like a door, then open the tailgate as you normally would. Each arm is independently operated.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat is the load capacity per arm?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eEach swing arm is rated at \u003cstrong\u003e50 kg\u003c\/strong\u003e — enough for a full-size spare on one arm and jerry cans or recovery boards on the other.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eCan the swing arms be removed for daily driving?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes — fully removable. Remove for daily use, reinstall quickly when going off-road or camping. The base bumper stays on permanently.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWill this fit my Touareg Gen 1?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes — the VW Touareg Dual Swingout Rear Bumper fits all Volkswagen Touareg Gen 1 (2002–2010) trims.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhere does this ship from and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we are happy to help.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003eVW Touareg Dual Swingout Rear Bumper Built for Durability\u003c\/h2\u003e\n\u003cp\u003eThe VW Touareg Dual Swingout Rear Bumper is engineered with 50mm manganese steel tube construction that guarantees long-lasting durability and superior expedition-grade strength. Its rugged design not only enhances the vehicle's aggressive off-road look but also provides excellent resistance against rock strikes and trail debris. Tailored specifically for the 2002–2010 Touareg Gen 1, this VW Touareg Dual Swingout Rear Bumper maintains structural integrity without compromising on style, making it an essential upgrade for serious overland builds.\u003c\/p\u003e\n\n\u003ch3\u003eEnhanced Off-Road Functionality of the VW Touareg Dual Swingout Rear Bumper\u003c\/h3\u003e\n\u003cp\u003eDesigned for long-range overland travel, the VW Touareg Dual Swingout Rear Bumper features two independently locking swing-out arms rated at 50 kg each for a full-size spare, jerry cans, or recovery gear. This allows your vehicle to carry serious expedition loads without compromise. Additionally, the VW Touareg Dual Swingout Rear Bumper includes a raised hitch mount and reinforced recovery points, giving you improved departure angles and dependable winching capability. Such features significantly improve vehicle capability in demanding environments.\u003c\/p\u003e\n\n\u003ch3\u003eEasy Installation and Vehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe VW Touareg Dual Swingout Rear Bumper is crafted for a precise fit on the 2002–2010 Touareg Gen 1 platform, ensuring seamless integration with factory mounting points. Installation of the VW Touareg Dual Swingout Rear Bumper requires no cutting, drilling, or welding, and the factory exhaust stays fully retained. This ease of installation helps owners upgrade quickly, letting them get back to exploring without delay. Compatibility and simplicity are key benefits valued by Touareg owners running this bumper.\u003c\/p\u003e\n","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":47652256579805,"sku":"OT-TRG-RB-DSO","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/dual-swingout-rear-bumper-touareg-02-10rear-bumperoverlandtrekoverlandtrekot-trg-rb-dso1-38de8c57-b9e3-4c7e-bc51-005b63757b65-4167300.jpg?v=1778490553"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/collections\/rear-bumper-3640229.jpg?v=1781235316","url":"https:\/\/www.overlandtrek.com\/collections\/rear-bumper.oembed","provider":"Overlandtrek","version":"1.0","type":"link"}