{"product_id":"porsche-cayenne-955-dual-swingout-rear-bumper-2002-2007","title":"Porsche Cayenne 955 Dual Swingout Rear Bumper (2002–2007)","description":"\u003cp\u003e\u003cstrong\u003eDual Swingout Rear Bumper for Porsche Cayenne 955 (2002–2007)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Overlandtrek Dual Swingout Rear Bumper is the definitive expedition rear end for the 955 Cayenne — two independently lockable swing-out arms for a full-size spare, jerry cans, recovery gear, or a high-lift jack, all on a platform that retains your factory exhaust and opens your tailgate normally. Built for owners who are serious about long-range overland travel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo cutting. No welding. No exhaust modifications. No permanent changes to your vehicle.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Carbon Manganese Steel construction\u003c\/strong\u003e — exceptional strength and impact resistance built for serious off-road use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50mm material thickness\u003c\/strong\u003e — heavy-gauge plate that stands up to rock strikes, brush, and trail debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull e-coating finish\u003c\/strong\u003e — corrosion-resistant electrophoretic coating protecting inside and out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust resistant\u003c\/strong\u003e — sealed, smooth-coated surface built for harsh, dusty environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e — engineered for a long service life under demanding conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation — no system interference\u003c\/strong\u003e — mounts to factory points without affecting your sensors, lighting, airbag, or other vehicle electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50mm manganese steel tube construction\u003c\/strong\u003e — the same high-strength alloy used in competitive off-road builds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual independently locking swing-out arms\u003c\/strong\u003e — rated at \u003cstrong\u003e50 kg load capacity\u003c\/strong\u003e per arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare tire carrier included\u003c\/strong\u003e — mounts full-size spare up to 50 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom 3-gallon fuel can mount\u003c\/strong\u003e — designed for the included jerry can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing arms are fully removable\u003c\/strong\u003e — remove for daily driving, reinstall in minutes for off-road or camping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory exhaust fully retained\u003c\/strong\u003e — only the lower factory bumper trim is removed; the muffler, exhaust tips, and all emissions components remain untouched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormal tailgate operation\u003c\/strong\u003e — swing one or both arms open like a door, then open the tailgate as normal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaised rear hitch mounting point\u003c\/strong\u003e for improved departure angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced recovery points\u003c\/strong\u003e rated for trail recovery and winching\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube material:\u003c\/strong\u003e Manganese steel, 50mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing arm load capacity:\u003c\/strong\u003e 50 kg per arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJerry can capacity:\u003c\/strong\u003e 3 gallons (custom-sized, included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Textured e-coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation — What You'll Need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Intermediate — two people recommended due to weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated install time:\u003c\/strong\u003e 3–5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools required:\u003c\/strong\u003e Floor jack, jack stands, basic socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling:\u003c\/strong\u003e None — uses factory mounting points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBodywork experience:\u003c\/strong\u003e Not required — the lower factory bumper trim is clip-on (no tools needed to remove)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Porsche Cayenne 955 (Gen 1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYears:\u003c\/strong\u003e 2002, 2003, 2004, 2005, 2006, 2007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrims:\u003c\/strong\u003e Base, S, Turbo, Turbo S, GTS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePorsche Cayenne 955 Dual Swingout Rear Bumper Built for Durability\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Porsche Cayenne 955 dual swingout rear bumper is engineered with 50mm manganese steel tube construction that guarantees long-lasting durability and superior expedition-grade strength. Its rugged design not only enhances the vehicle's aggressive look but also provides excellent resistance against rock strikes and trail debris. Tailored specifically for the 2002–2007 Cayenne, this Porsche Cayenne 955 dual swingout rear bumper maintains structural integrity without compromising on style, making it an essential upgrade for serious overland builds.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEnhanced Off-Road Functionality of the Porsche Cayenne 955 Dual Swingout Rear Bumper\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eDesigned for long-range overland travel, the Porsche Cayenne 955 dual swingout rear bumper features two independently locking swing-out arms rated at 50 kg each for a full-size spare, jerry cans, or recovery gear. This allows your vehicle to carry serious expedition loads without compromise. Additionally, the Porsche Cayenne 955 dual swingout rear bumper includes a raised hitch mount and reinforced recovery points, giving you improved departure angles and dependable winching capability. Such features significantly improve vehicle capability in demanding environments.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEasy Installation and Vehicle Compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003eThe Porsche Cayenne 955 dual swingout rear bumper is crafted for a precise fit on the 2002–2007 Gen 1 Cayenne, ensuring seamless integration with factory mounting points. Installation of the Porsche Cayenne 955 dual swingout rear bumper requires no cutting, drilling, or welding, and the factory exhaust stays fully retained. This ease of installation helps owners upgrade quickly, letting them get back to exploring without delay. Compatibility and simplicity are key benefits valued by Cayenne owners running this bumper.\u003c\/p\u003e\n\u003ch3\u003eWhat Gets Removed at Installation\u003c\/h3\u003e\n\u003cp\u003eOnly the \u003cstrong\u003elower section of the factory rear bumper trim\u003c\/strong\u003e (held in place by clips — no tools needed) is removed and replaced by this bumper. The upper factory bumper section, the factory exhaust system, muffler, exhaust tips, and all emissions-related components are completely retained. No cutting, drilling, or welding to the vehicle.\u003c\/p\u003e\n\u003ch3\u003eBuilt for the Trail\u003c\/h3\u003e\n\u003cp\u003ePair this swingout rear bumper with our \u003ca href=\"\/collections\/front-bumper\"\u003e\u003cstrong\u003ematching 955 front bumper\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/collections\/roof-rack\"\u003e\u003cstrong\u003emodular roof rack\u003c\/strong\u003e\u003c\/a\u003e, and \u003ca href=\"\/collections\/underbody-protection\"\u003e\u003cstrong\u003eunderbody skid plate kit\u003c\/strong\u003e\u003c\/a\u003e for a complete expedition build.\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 1px; background: #e0e0e0; border: 1px solid #e0e0e0; border-radius: 8px; overflow: hidden; margin: 24px 0;\"\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eFactory exhaust retained\u003c\/strong\u003e\u003cbr\u003eNo muffler removal. All emissions components untouched.\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003e50 kg arm load rating\u003c\/strong\u003e\u003cbr\u003eRated capacity per swing arm\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eTailgate opens normally\u003c\/strong\u003e\u003cbr\u003eSwing the arm open like a door, then open your hatch\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eArms are removable\u003c\/strong\u003e\u003cbr\u003eRemove for daily driving, reinstall for off-road\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes this bumper require removing the factory exhaust or muffler?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo — and this is important. Only the \u003cstrong\u003elower clip-on section of the factory rear bumper trim\u003c\/strong\u003e is removed. The muffler, exhaust tips, and all factory emissions components are completely retained. This bumper is suitable for use in California and all other emissions-regulated states without any exhaust modifications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I still open the tailgate normally?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Swing one or both arms outward (they operate like a door), then open your tailgate as normal. The arms are independently operated — you only need to open the side you need access from.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the load capacity of the swing arms?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEach swing arm is rated at \u003cstrong\u003e50 kg\u003c\/strong\u003e. This is sufficient for a full-size spare wheel and tyre on one arm, and jerry cans or recovery gear on the other. Do not exceed 50 kg per arm.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan the swing arms be removed for daily driving?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — the arms are fully removable. Remove them for everyday driving and reinstall quickly when heading off-road or camping. The base bumper remains in place permanently.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat can I mount on the swing arms?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSpare tire carrier is included (rated to 50 kg). A custom 3-gallon jerry can is also included and sized specifically for this bumper. For other accessories, contact us at info@overlandtrek.com to confirm compatibility.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this fit my Cayenne 955?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — fits all 2002–2007 Porsche Cayenne 955 trims: Base, S, Turbo, Turbo S, and GTS. Direct bolt-on, no modifications required.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhere does this ship from and how long does delivery take?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eManufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks. Tracking provided once shipped.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eI still have questions. How do I contact you?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEmail us at \u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e — we're happy to help with fitment, load ratings, or build advice.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":46444548194525,"sku":"OT-C955-RB-DSO","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/dual-swingout-rear-bumper-955-cayenne-02-07rear-bumperoverlandtrekoverlandtrekot-c955-rb-dsoa93842ca49ee2cd215552dce919c1e4d-9224711.jpg?v=1779756041","url":"https:\/\/www.overlandtrek.com\/products\/porsche-cayenne-955-dual-swingout-rear-bumper-2002-2007","provider":"Overlandtrek","version":"1.0","type":"link"}