Porsche Cayenne 955/957 & VW Touareg 2-Inch Steel Spring Lift Kit (2002–2010)
Regular price
$799.00 USD
Sale price
$799.00 USD
Regular price
Unit price
per
Shipping calculated at checkout.
Confirmed fitment
Porsche Cayenne 955/957 & VW Touareg (2002–2010)
Couldn't load pickup availability
Secure
checkout
checkout
Fitment
backed
backed
Real
support
support
Worldwide
shipping
shipping
Ships in 4–6 weeks · Tracked Worldwide
Chat on WhatsApp
Message on Telegram
Message on Instagram
Email Us
Low stock! Only 11 left
2-Inch Steel Spring Lift Kit for Porsche Cayenne 955/957 & VW Touareg (2002–2010)
The Overlandtrek 2-Inch Steel Spring Lift Kit is the definitive air-suspension-delete option for the Gen 1 Cayenne and Touareg platform. The lift spacers are installed at the top mount of the factory suspension — the original suspension system itself does not need to be removed — and uprated steel coil springs replace the factory air bags for a simpler, more reliable long-term setup. Built for overlanders who want a dependable system in remote locations far from specialist workshops.
Key Features
- 7075 Aluminum Alloy construction — exceptional strength and impact resistance built for serious off-road use
- Full e-coating finish — corrosion-resistant electrophoretic coating protecting inside and out
- Dust resistant — sealed, smooth-coated surface built for harsh, dusty environments
- High durability — engineered for a long service life under demanding conditions
- Bolt-on installation — no system interference — fits to factory points with no fault codes and no interference with sensors or vehicle electronics
- 2 inches of additional ride height
- Forged 7075 aluminum lift spacers — installed at factory strut top mount, original suspension retained below
- Uprated steel coil springs replace factory air bags only — original dampers and struts retained
- Eliminates air suspension bags, compressor, and sensor complexity
- Tuned for load-carrying overland use
- Under 3 inches of lift — within road legal limits for most regions
- 1-year warranty — free replacement parts for any defect within 12 months
Specifications
- Spacer material: Forged 7075 aluminum alloy
- Spring material: High-tensile steel coil
- Lift amount: 2 inches
- Warranty: 1 year — free replacement parts within 12 months
Installation — What You'll Need
- Difficulty: Advanced — requires spring compressor and air suspension delete knowledge
- Estimated install time: 6–8 hours
- Tools required: Floor jack, jack stands, spring compressor, full socket set, torque wrench
- Cutting / drilling: None
- Welding: None required
- Also required: Air suspension emulator / delete module (to clear fault codes — sold separately)
- After install: Full wheel alignment required — geometry correction recommended
Fitment
- Vehicles: Porsche Cayenne 955 (2002–2007), Porsche Cayenne 957 (2008–2010), Volkswagen Touareg Gen 1 (2002–2010)
After Installation — Important
A full wheel alignment is required after installation. Deleting the air suspension system will also trigger fault codes and warning lights — an air suspension emulator or delete module will be needed to clear these. This is a committed modification.
Geometry Correction Recommended
Pair with our Subframe Drop Kit, Upper Control Arms, and Sway Bar End Links for a complete corrected build.
Frequently Asked Questions
Does this kit remove the original suspension system?
No — the original struts and dampers are retained. The 2-Inch Steel Spring Lift Kit spacers mount at the factory strut top mount above the existing suspension. Only the factory air bags are replaced with steel coil springs. The suspension geometry below the top mount is unchanged.
What is the difference between this and the standard 2-inch lift kit?
The standard 2-inch kit adds lift spacers over the factory air suspension, retaining the full air system. This 2-Inch Steel Spring Lift Kit replaces the factory air bags with steel coils and deletes the air suspension — for owners who want to eliminate the complexity of the air system entirely for long-term reliability.
Will deleting the air suspension cause fault codes?
Yes — removing the air suspension triggers warning lights and fault codes from the suspension control module. An air suspension emulator or delete module is required to clear these. This is a committed modification. Contact info@overlandtrek.com before ordering if you have questions about the conversion process.
Is a wheel alignment required after installation?
Yes — a full wheel alignment is required after any suspension modification. Book an alignment appointment immediately after fitting.
Is this lift kit legal for road use?
At 2 inches, the 2-Inch Steel Spring Lift Kit is within the road legal lift limit for most countries and US states. However, deletion of the factory air suspension system may affect your vehicle's compliance with local roadworthiness standards. Check with your local authority if you are unsure.
What warranty does this come with?
1-year warranty. Free replacement parts for any defect or failure within 12 months. Contact info@overlandtrek.com with your order number.
Where does this ship from and how long does delivery take?
Manufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 4–6 weeks.
I still have questions. How do I contact you?
Email us at info@overlandtrek.com — we are happy to walk you through the full conversion process.
2-Inch Steel Spring Lift Kit Built for Durability
The 2-Inch Steel Spring Lift Kit is engineered with forged 7075 aluminum spacers and high-tensile steel coil springs that guarantee long-lasting durability and superior load-carrying capability. Its rugged design not only adds 2 inches of ride height but also provides excellent resistance against the stress of overland loads and rough terrain. Tailored specifically for the Porsche Cayenne 955, 957, and VW Touareg Gen 1, this 2-Inch Steel Spring Lift Kit maintains structural integrity without compromising the original suspension below the top mount, making it an essential upgrade for serious long-distance overland builds.
Enhanced Off-Road Functionality of the 2-Inch Steel Spring Lift Kit
Designed for the demands of remote overland travel, the 2-Inch Steel Spring Lift Kit eliminates factory air suspension complexity by replacing the air bags with proven steel coil springs. This allows your vehicle to operate dependably far from specialist workshops. Additionally, the 2-Inch Steel Spring Lift Kit adds clearance for larger tyres while keeping the original struts in place, giving you flexibility and confidence on long trips. Such features significantly improve vehicle reliability in demanding environments.
Easy Installation and Vehicle Compatibility
The 2-Inch Steel Spring Lift Kit is crafted for a precise fit on the Cayenne 955, 957, and Touareg Gen 1 platforms, ensuring seamless integration with factory strut top mounts. Installation of the 2-Inch Steel Spring Lift Kit is direct bolt-on, requiring no cutting, drilling, or welding. This straightforward installation helps owners commit to the air delete conversion efficiently, letting them get back to driving without delay. Compatibility across the VW Group platform and bolt-on simplicity are key benefits valued by Cayenne and Touareg owners.
