VW Touareg Dual Swingout Rear Bumper (2002–2010)
Regular price
$1,599.00
Sale price
$1,599.00
Regular price
Unit price
per
Shipping calculated at checkout.
Confirmed fitment
VW Touareg (2002–2010)
Couldn't load pickup availability
Secure
checkout
checkout
Fitment
backed
backed
Real
support
support
Worldwide
shipping
shipping
Ships in 4–6 weeks · Tracked Worldwide
Low stock! Only 13 left
Dual Swingout Rear Bumper for Volkswagen Touareg (2002–2010)
The Overlandtrek VW Touareg Dual Swingout Rear Bumper for the Gen 1 Touareg delivers the full expedition rear-end setup — two independently lockable swing-out arms rated at 50 kg each, a spare tire carrier, and a 3-gallon jerry can mount — with no exhaust modifications, no cutting, and no welding required.
No cutting. No welding. No exhaust modifications. No permanent changes to your vehicle.
Key Features
- 50mm manganese steel tube construction — high-strength alloy for serious off-road use
- Dual independently locking swing-out arms — rated at 50 kg load capacity per arm
- Spare tire carrier included — mounts full-size spare up to 50 kg
- Custom 3-gallon fuel can mount — sized specifically for this bumper
- Swing arms fully removable — remove for daily driving, reinstall for off-road
- Factory exhaust fully retained — only the lower clip-on factory bumper trim is removed; muffler and all emissions components untouched
- Normal tailgate operation — swing the arm open, tailgate opens as usual
- Raised rear hitch mounting point for improved departure angle
- Reinforced recovery points for winching and trail recovery
- Durable powder-coat finish — UV-stable and corrosion-resistant
Specifications
- Tube material: Manganese steel, 50mm diameter
- Swing arm load capacity: 50 kg per arm
- Jerry can capacity: 3 gallons (custom-sized, included)
- Finish: Textured powder coat
Installation — What You'll Need
- Difficulty: Intermediate — two people recommended due to weight
- Estimated install time: 3–5 hours
- Tools required: Floor jack, jack stands, basic socket set, torque wrench
- Cutting / drilling: None — uses factory mounting points
- Welding: None required
- Bodywork experience: Not required — the lower factory bumper trim is clip-on (no tools needed to remove)
Fitment
- Vehicle: Volkswagen Touareg Gen 1
- Years: 2002–2010
What Gets Removed at Installation
Only the lower clip-on section of the factory rear bumper trim is removed — no cutting, drilling, or tools required. The upper bumper section, factory exhaust system, muffler, and all emissions components remain completely untouched.
Built for the Trail
Pair this Touareg swingout rear bumper with our matching Touareg front bumper, modular roof rack, and underbody skid plate kit for a complete expedition build.
Frequently Asked Questions
Does this bumper require removing the factory exhaust or muffler?
No. The VW Touareg Dual Swingout Rear Bumper only requires removing the lower clip-on section of the factory rear bumper trim — it simply unclips, no cutting or tools required. The factory muffler, exhaust tips, and all emissions components are completely untouched. Suitable for California and all emissions-regulated regions without any exhaust modifications.
Can I still open my tailgate normally?
Yes. Swing one or both arms outward like a door, then open the tailgate as you normally would. Each arm is independently operated.
What is the load capacity per arm?
Each swing arm is rated at 50 kg — enough for a full-size spare on one arm and jerry cans or recovery boards on the other.
Can the swing arms be removed for daily driving?
Yes — fully removable. Remove for daily use, reinstall quickly when going off-road or camping. The base bumper stays on permanently.
Will this fit my Touareg Gen 1?
Yes — the VW Touareg Dual Swingout Rear Bumper fits all Volkswagen Touareg Gen 1 (2002–2010) trims.
Where does this ship from and how long does delivery take?
Manufactured at our facility and shipped worldwide with full tracking. Delivery typically takes 2–4 weeks.
I still have questions. How do I contact you?
Email us at info@overlandtrek.com — we are happy to help.
VW Touareg Dual Swingout Rear Bumper Built for Durability
The VW Touareg Dual Swingout Rear Bumper is engineered with 50mm manganese steel tube construction that guarantees long-lasting durability and superior expedition-grade strength. Its rugged design not only enhances the vehicle's aggressive off-road look but also provides excellent resistance against rock strikes and trail debris. Tailored specifically for the 2002–2010 Touareg Gen 1, this VW Touareg Dual Swingout Rear Bumper maintains structural integrity without compromising on style, making it an essential upgrade for serious overland builds.
Enhanced Off-Road Functionality of the VW Touareg Dual Swingout Rear Bumper
Designed for long-range overland travel, the VW Touareg Dual Swingout Rear Bumper features two independently locking swing-out arms rated at 50 kg each for a full-size spare, jerry cans, or recovery gear. This allows your vehicle to carry serious expedition loads without compromise. Additionally, the VW Touareg Dual Swingout Rear Bumper includes a raised hitch mount and reinforced recovery points, giving you improved departure angles and dependable winching capability. Such features significantly improve vehicle capability in demanding environments.
Easy Installation and Vehicle Compatibility
The VW Touareg Dual Swingout Rear Bumper is crafted for a precise fit on the 2002–2010 Touareg Gen 1 platform, ensuring seamless integration with factory mounting points. Installation of the VW Touareg Dual Swingout Rear Bumper requires no cutting, drilling, or welding, and the factory exhaust stays fully retained. This ease of installation helps owners upgrade quickly, letting them get back to exploring without delay. Compatibility and simplicity are key benefits valued by Touareg owners running this bumper.
